Enermax Platimax 750W - 80 Plus Platinum Arrives
Voltage Regulation
| +3.3V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +0.91% (14mV) |
| 10% | +0.91% (22mV) |
| 20% | +0.30% (26mV) |
| 50% | -0.61% (32mV) |
| 80% | -1.82% (14mV) |
| 100% | -3.33% (39mV) |
| 110% | -3.63% (42mV) |
| Crossload +12V max. | +0.00% |
| Crossload +3.3V/+5V max. | -0.30% |
| +5V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +1.20% (10mV) |
| 10% | +1.00% (17mV) |
| 20% | +0.80% (20mV) |
| 50% | -0.40% (20mV) |
| 80% | -1.40% (25mV) |
| 100% | -2.40% (28mV) |
| 110% | -2.60% (30mV) |
| Crossload +12V max. | +0.60% |
| Crossload +3.3V/+5V max. | -0.40% |
| +12V Regulation (Worst Rail)/Ripple and Noise (Worst Rail) | |
| Load | Voltage |
| 5% | +1.92% (18mV) |
| 10% | +1.92% (34mV) |
| 20% | +1.83% (38mV) |
| 50% | +1.50% (51mV) |
| 80% | +1.25% (64mV) |
| 100% | +1.08% (67mV) |
| 110% | +0.83% (67mV) |
| Crossload +12V max. | +1.08% |
| Crossload +3.3V/+5V max. | +0.83% |
Noise Levels
| Acoustic Noise Impressions | |
| Load | Opinion |
| 5% | low fan noise |
| 10% | low fan noise |
| 20% | low fan noise |
| 50% | low fan noise |
| 80% | low fan noise |
| 100% | fan noise |
| 110% | fan noise |
Efficiency and PFC
| 115VAC. 60Hz | ||
| Load | Efficiency | PFC |
| 5% | 77.53% | 0.799 |
| 10% | 86.93% | 0.872 |
| 20% | 88.79% | 0.927 |
| 50% | 92.20% | 0.965 |
| 80% | 91.46% | 0.975 |
| 100% | 89.09% | 0.979 |
| 110% | 88.71% | 0.981 |
At 10% load the power supply reaches a higher efficiency than many power supplies reach at their optimal output. With a starting value of just under 0.8 that quickly scales into the >0.92 range, the power factor is relatively high as well. More than 92% efficiency can be achieved during 50% load, which is an awesome result. Moreover the PSU doesn't mind the crossload tests with different loads on the outputs; the voltage is always within ATX specification. Nevertheless the voltage on the 3.3V output could be higher while ripple and noise should be much lower on this output since this is a high-quality product.
As far as acoustics are concerned, the fan is almost always near-silent. It's only at 100% load that the fan becomes noticeable, but considering the 750W power output you would likely have several other components generating more noise to even reach that level (e.g. CPU and GPU fans).
Overall, the performance of the Platimax 750W is very good—just as we'd expect from a halo product. What's a bit surprising, however, is that our test sample technicallly failed to achieve the required 90% efficiency at 20% load for 80 Plus Platinum certification. Of course, there are differences in test environments and that may be the reason we "only" managed 89% efficiency instead of 90% efficiency. Since we're not the people doing the actual certification, we'll leave it there.
Originally published at https://www.anandtech.com/show/5252/enermax-platimax-750w-80-plus-platinum-arrives (Wayback Machine).