Archive 1997–2024

ASUS E35M1-M Pro Review - Anyone For Fusion?

LAN Speed Test

LAN Speed Test is a freeware program designed for testing the network connection between two PCs on a home network.  The speed of the transfer is limited by the lowest common denominator on the network, so if you have gigabit Ethernet capable computers but a 100 Mbit capable router, you are limited to 100 Mbit transfer.  Note that this is really a formality – if a network port is rated at 1 Gbps, then chances are that it will hit at least 90+% of this value.  The main test here is CPU usage, and how much is offloaded by the controller.  For this test, we use LAN Speed Test to transfer a 1000 MB file across a home network with a 1000 Mbps lowest common speed to the same machine each time, in a read/write scenario.  

LAN Read Sequential

LAN Write Sequential

As we only have two results on the A50M platform which were tested under a 1 Gbps environment, I have decided to compare it to a few other platforms too. LAN throughput should be down to the onboard chip and therefore it has been compared to these platforms. Judging by the read and write speeds, the E35M1-M Pro does well for itself and is above average in the read tests but falls just under the average marker with the write tests.

USB Speed

For this benchmark, we run CrystalDiskMark to determine the ideal sequential read and write speeds for the USB port using our 64GB Patriot SuperSpeed USB 3.0 drive.  Then we transfer a set size of files from the SSD to the USB drive, and monitor the time taken to transfer.  The files transferred are a 1.52 GB set of 2867 files across 320 folders – 95% of these files are small typical website files, and the rest (90% of the size) are the videos used in the Sorenson Squeeze test.

USB 2.0 Sequential Read Speeds

USB 2.0 Sequential Write Speeds

USB 2.0 Copy Time

The USB 2.0 read speeds are above average out of the four boards but the writes on the other hand come in at bottom place.  The reason for this is unknown.

USB 3.0 Sequential Read Speeds

USB 3.0 Sequential Write Speeds

USB 3.0 Copy Time

Write speeds on the USB 3.0 side of things are much better than the USB 2.0 results and the read speeds are above average here as well.

SATA Testing

We also use CrystalDiskMark for SATA port testing.  The operating system is installed on the OCZ Vertex 3 240GB SSD, which is rated at up to 550 MB/s read and up to 520 MB/s write, and the sequential test is run at the 5 x 1000 MB level on a separate clean partition.  This test probes the efficiency of the data delivery system between the chipset and the drive, or in the case of additional SATA ports provided by a third party controller, the efficiency between the controller, the chipset and the drive.

SATA 6 Gbps Sequential Read Speeds

SATA 6 Gbps Sequential Write Speeds

In the Vertex 3 testing the board got the fastest read speeds for A50M  but the write speeds were below average.  It is debatable whether a user would notice this is regular usage for this board, however.

DPC Latency

Deferred Procedure Call latency is a way in which Windows handles interrupt servicing.  In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority.  Critical interrupts will be handled as soon as possible, whereas lesser priority requests, such as audio, will be further down the line.  So if the audio device requires data, it will have to wait until the request is processed before the buffer is filled.  If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time, resulting in an empty audio buffer – this leads to characteristic audible pauses, pops and clicks.  Having a bigger buffer and correctly implemented system drivers obviously helps in this regard.  The DPC latency checker measures how much time is processing DPCs from driver invocation – the lower the value will result in better audio transfer at smaller buffer sizes.  Results are measured in microseconds and taken as the peak latency while cycling through a series of short HD videos - under 500 microseconds usually gets the green light, but the lower the better.

DPC Latency Maximum

The E35M1-M PRO currently holds the lowest DPC Latency score in our records for the A50M platform.

Originally published at https://www.anandtech.com/show/4996/asus-e35m1m-pro-review-anyone-for-fusion (Wayback Machine).