Archive 1997–2024

BitFenix Shinobi: The Budget Ninja

Noise and Thermal Testing, Stock

The stock settings for our platform are fairly representative of a mid-to-high-end configuration, the upper perimeter of the kind of build we'd expect users to install in a case like the BitFenix Shinobi. Going into this testing I wasn't sure what to expect; there are certainly concerns about the hard drive and video card blocking air from getting to the processor heatsink. Note that both the NZXT H2 and Antec Sonata IV have selectable fan speeds with their built-in fan controllers, while the In-Win BUC and BitFenix Shinobi both use the motherboard fan controls. The H2 and Sonata IV results included here are from their "medium" fan settings which produced a good balance between thermal performance and noise.

Unfortunately the thermals are less than ideal. Once again In-Win's BUC pulls a victory, a testament to its slick design (and probably the extra fan it includes). The Shinobi features some of the highest idle temperatures, but load temperatures are at least on par with if not better than the Antec Sonata IV and the air-starved NZXT H2.

On the flip side, the Shinobi winds up being the quietest of the cases we've tested at idle, so while the temperatures are a bit higher, they're nowhere near dangerous and the Shinobi is able to keep things running silently. Under load it's still in good shape, hanging out in the same neighborhood as the well-ventilated BUC and the soundproofed H2.

Originally published at https://www.anandtech.com/show/4460/bitfenix-shinobi-the-budget-ninja (Wayback Machine).