Antec HCG 520W: A Good PSU for Bargain Hunters
Noise Levels
| Sound Pressure Level (Ambient: 16dBA, 1m distance) | |
| Load | dB(A) |
| 10% | 17 |
| 20% | 18 |
| 50% | 20 |
| 80% | 28 |
| 100% | 30 |
| 110% | 32 |
The HCG-520 is not audible at low loads and comes in very close to the lowest value we can measure (16 dB(A)). At 50% load we can definitely hear the fan, but 20 dB(A) is far from a bad result. Upon reaching 80% load, the fan noise ratchets up quite a bit and the PSU is no longer silent, but generally speaking you will need to put a decent load on your CPU and GPU to reach a power draw of over 400W, at which point those components are likely to generate more noise than the PSU. Total system noise isn't strictly additive either, but keep the above in mind when configuring your PC.
Efficiency and PFC
| 115VAC, 60Hz | ||
| Load | Efficiency | PFC |
| 10% | 78% | 0.938 |
| 20% | 84% | 0.977 |
| 50% | 86% | 0.982 |
| 80% | 85% | 0.988 |
| 100% | 83% | 0.994 |
| 110% | 82% | 0.996 |
| 230VAC, 50Hz | ||
| Load | Efficiency | PFC |
| 10% | 79% | 0.918 |
| 20% | 85% | 0.942 |
| 50% | 87% | 0.960 |
| 80% | 86% | 0.975 |
| 100% | 85% | 0.989 |
| 110% | 83% | 0.991 |
Since many readers like measurements at 115VAC as well as 230VAC, we have two charts. The efficiency isn't great at 10% load, but 80 Plus certification only tests at 20, 50 and 100% load so all the results fall in the expected 80 Plus Bronze range. The power factor is very high on both power grids which is a rarity, particularly for 230VAC. The overall results are very good, delivering good quality for all potential users.
Originally published at https://www.anandtech.com/show/4343/antec-hcg-520-good-bargain (Wayback Machine).