Antec HCG 520W: A Good PSU for Bargain Hunters
Voltage Regulation
| +3.3V Regulation | |
| Load | Voltage |
| 10% | +2.42% |
| 20% | +2.12% |
| 50% | +1.21% |
| 80% | +0.61% |
| 100% | +-0% |
| 110% | -0.61% |
| +5V Regulation | |
| Load | Voltage |
| 10% | +1.80% |
| 20% | +1.40% |
| 50% | +0.60% |
| 80% | -0.20% |
| 100% | -1.40% |
| 110% | -1.80% |
| +12V Regulation (Worst Rail) | |
| Load | Voltage |
| 10% | +1.92 % |
| 20% | +1.75 % |
| 50% | +1.50 % |
| 80% | +0.42 % |
| 100% | +0.33 % |
| 110% | +0.17 % |
Like most PSUs the Antec HCG 520W has a low voltage drop on +12V; even at overload the voltage is above 12.00V, which is a good sign for a strong single rail. The other rails also perform well. +3.3V starts high but that shouldn't be a problem since the measurement is still within specification. +5V ends like it starts with a 1.8% difference to the optimal value.
Ripple and Noise
| +3.3V Ripple Quality | |
| Load | Ripple and Noise |
| 10% | 7mV |
| 20% | 8mV |
| 50% | 10mV |
| 80% | 11mV |
| 100% | 13mV |
| 110% | 16mV |
| +5V Ripple Quality | |
| Load | Ripple and Noise |
| 10% | 5mV |
| 20% | 6mV |
| 50% | 8mV |
| 80% | 9mV |
| 100% | 10mV |
| 110% | 11mV |
| +12V Ripple Quality (Worst Rail) | |
| Load | Ripple and Noise |
| 10% | 9mV |
| 20% | 11mV |
| 50% | 12mV |
| 80% | 20mV |
| 100% | 35mV |
| 110% | 38mV |
The HCG-520 shows slightly better results than the 750W version. +12V stays under 40mV while +3.3V and +5V don't even reach the magic 20mV level. The value on +12V increases a lot when running 80% load or more, but the results are still impressive. With good quality outputs, PCs using this PSU should experience fewer component failures and be more likely to last a long time.
Originally published at https://www.anandtech.com/show/4343/antec-hcg-520-good-bargain (Wayback Machine).