Archive 1997–2024

HuntKey Jumper/R90 300W 80Plus Gold

Internals and Components

The first thing to note when looking at the internals are the three very thin and small heatsinks. That might be cause for concern in larger power supplies, but with the high efficiency there shouldn't be a lot of heat lost inside the PSU. The Gold certification requires at least 87% efficiency at 100% load, which would work out to at most 45W of internal heat loss. With the 120mm fan blowing on the components, things should be fine.

Looking at the power circuitry, starting at the input. Four Y- and two X-capacitors, one relay to handle current in-rush, current-compensated and linear chokes, and an MOV are all part of the EMI filtering. After that, HuntKey uses a common 10A bridge rectifier in a KBU housing. The PFC choke has its own plastic case, which is nice to see. Like Seasonic, HuntKey has different ICs for PWM and PFC. There's a CM6901X for switch control, which is physically in the secondary circuit. That's why they need the separate CM6502SX for PFC; most manufacturers combine both functions in one IC.There are two IRFB3206PBF in the secondary for active rectifying. Another interesting detail is the diode in the power factor preregulator. It's a component from QSpeed with one of the lowest reverse recovery charges in the inexpensive price range--usually a problem with CCM.

The main capacitor is a Rubycon USG rated at 85C/2000h and 220 μF. Two MOSFETS from ST Mircoelectronics follow (fully isolated TO-220FP casing), with a resonant topology and very efficient transformers. After rectification HuntKey has two DC-to-DC VRMs for +5V and +3.3V; both use all solid capacitors for filtering. The +12V rails also have plenty of solid capacitors, with a few liquid electrolyte caps as well.

This PSU has OVP on both sides, along with UVP, SCP, OCP, and OPP. It doesn't have OTP, but there's a diode for temperature measurements as part of the fan control. OCP worked fine in testing, tripping at 28A (336W).

There's not a lot of empty space on the PCB, the the PSU uses active cooling and an efficient design so that shouldn't be a problem; the 14cm casing could actually be shorter if HuntKey wanted. On the left is a large plastic piece to protect the PSU from short circuits caused by contact with external objects. Finally, the PCB uses first class material with good soldering. We've never seen this sort of quality in a retail 300W PSU before, so overall the internals are awesome!

Gallery: HuntKey R90

Originally published at https://www.anandtech.com/show/4069/huntkey-300w-80plus-gold (Wayback Machine).