Archive 1997–2024

1000W-1200W Roundup: Five High-End PSUs

Antec HCP-1200 Noise

Sound Pressure Level
Load dB(A)
10% 18
20% 19
50% 19
80% 24
100% 28
110% 34

Antec is a little bit louder than OCZ at maximum load, but 34dBA is great for an 80mm fan, and it's also very good for a 1200W PSU. The HCP-1200 is virtually silent at anything below 50% load, though it's doubtful the rest of your system will fare as well if you're pulling 600W or more. In this case, Antec delivers better noise than several other competitors despite the use of a higher RPM 80mm fan - a testament to the quality of components and the engineering.

Efficiency and PFC

230VAC, 50Hz
Load Efficiency PFC
10% 86% 0.885
20% 89% 0.975
50% 91% 0.989
80% 91% 0.989
100% 89% 0.995
110% 88% 0.995

 

115VAC, 60Hz
Load Efficiency PFC
10% 85% 0.981
20% 89% 0.990
50% 90% 0.999
80% 88% 0.997
100% 88% 0.996
110% 87% 0.996

Delivering 85/86% efficiency even at a low 10% load is a great place to start, and it only goes up from there. Nevertheless, we did measure slightly less than ECOS Gold Certification at 50% load; the exact figure was 89.62%, but we rounded up to 90%. That could just be a slight measuring tolerance, but even so Antec could be more efficient. It's still a great PSU overall, but with the cost we wanted to see just a little bit more separation from the competition.

Originally published at https://www.anandtech.com/show/3992/1000w1200w-highend-psuroundup (Wayback Machine).