Antec EarthWatts EA 380D Green 380W
Cooling & Noise Level
| Sound Pressure Level | |
| Load | dB(A) |
| 10% | 21 |
| 20% | 22 |
| 50% | 23 |
| 80% | 24 |
| 100% | 28 |
| 110% | 34 |
Objectively the noise level is above the level of the quietest PSUs, which often start below 20 dBA. But the increase is moderate until load reaches 80%. After that, the RPMs increase quickly, which results in nearly 35dBA at overload. But there is sufficient cooling because the exhaust air always stays cool and the result is a higher lifespan of the PSU.
Like the first generation of the EarthWatts PSUs, Antec is using an ADDA-fan (AD0812H5-A70GL), which has a ball bearing and a power consumption of 0.25A. The fan draws the warm air out of the rear of the PSU. With a fan vertically mounted to the PCB, heat-sensitive components have to be placed in the airflow. The air flows relatively unobstructed through the case, while top blowing fans guide the air first to the PCB and then to the outside. So basically it doesn’t matter which concept is chosen because both ideas have advantages and disadvantages. The fan itself and its control mode is more important.
Originally published at https://www.anandtech.com/show/3902/antec-earthwatts-ea-380d-green-380w (Wayback Machine).
