Archive 1997–2024

Antec TruePower Quattro 1200W

Ripple and Noise

Up next we want to show you some ripple and noise results for each important rail and load. +3.3V and +5V shouldn’t have more than 50 mV (the same level, because +3.3V is often derived from +5V); +12V should be less than 120 mV. So 1% is the maximum limit. The graphics show peak measurements in the bottom left corner as well as the quantity of conspicuous spikes. We have chosen 20 mV per division. We'll put these on separate pages just to avoid overloading one page.

Ripple and Noise +3.3V


10%

20%

50%

80%

100%

110%

+3.3V is very clean and starts with only 7.9 mV. Even with overload there is not more than 30 mV.

Originally published at https://www.anandtech.com/show/3807/antec-truepower-quattro-1200w (Wayback Machine).