A New 30" Contender: HP ZR30w Review
Brightness Uniformity
In addition to the performance at center, we’ve also added 9-point testing for brightness, both white and black. This is done the same way we measure color uniformity, except we only care about measured intensity. We set the monitor through the "OSD controls" to near 200 nits, and then measure those 9 points.
White Level Uniformity
Black Level Uniformity
Our plots here do exaggerate differences - the ZR30w is remarkably uniform with an average brightness of 203 nits and a standard deviation of 6 nits. There’s a bit of a pattern for white, up top there’s a measured falloff compared to the rest of the panel, but visually I couldn’t discern any difference. It seems that under 10 nits is difficult to really discern.
Blacks are a similar story - they're very uniform. The average is 0.31 nits with a standard deviation of 0.019. There’s a slight brightness difference horizontally across the display, but again even after intense scrutiny I couldn’t discern anything. Brightness uniformity is impressive as expected.
Originally published at https://www.anandtech.com/show/3754/a-new-30-contender-hp-zr30w-review (Wayback Machine).



