Archive 1997–2024

Enermax Gold: Modu87+ and Pro87+

Modu/Pro87+ 500W Voltage Stability and Quality

We tested all of the units we had on hand, but after comparing the results it was clear that similar models with the same wattage perform absolutely the same. We saw differences of only a tenth of a volt, which leads us to the conclusion that we only need to show only chart for each wattage and avoid the redundancy of showing both the Modu87+ and the Pro87+. The results of the Modu87+ and Pro87+ are virtually identical. In fact, Modu87+ performs a little better in our tests, despite the rumors that cable management adds additional resistance to the cables. There is additional resistance, yes, but it's so marginal that one can hardly see a real difference in a test lab. The difference at a user's home wouldn't be at all measureable, and the minor variation we tested between the Modu87+ and the Pro87+ is likely due to small variations between any two PSUs off the same production line.




The voltage regulation for the 12V rail is fantastic. Both lower voltage rails are a little behind but still make a good impression. There is almost no fluctuation in the 12V rail and it provides stable output without breaking a sweat.

Ripple



The 5V rail held stable with ripple of only 14mV, but the 3.3V rail ripple is sky-high - close to the maximum allowable amount according to the ATX specification. 3.3V output isn't critical these days, so we can overlook this "flaw". All three 12V rail are stable at 40mV to 60mV, which is by far the most important result.


20% load


50% load


100% load

Originally published at https://www.anandtech.com/show/2920 (Wayback Machine).