Archive 1997–2024

Enermax Gold: Modu87+ and Pro87+

A look Inside


When opening this unit we couldn't really see anything different inside than you'd see in other power supplies. If you take a closer look you will find a few differences though. In fact this unit uses some of the same technology as Seasonic does in their latest X-series. Enermax's so called Dynamic Hybrid Transformer technology, part of the "resonant topology", is nothing more than a kind of gearbox for the components. This way Enermax can regulate the voltage that goes into the capacitor ranging from roughly 330V to 400V. If the load on the DC output is low the voltage to the capacitor will be lower as well, resulting in better efficiency. The same goes for the frequencies which will be decreased with higher loads and increased when the DC load is lower.

In the secondary part we see two "DC to DC" sister PCBs where the 5V and 3.3V rails are created. Below these two sister PCBs we find capacitors attached to another PCB vertically. Enermax actually carries a patent for this arrangement which is space saving and enhances the cooling of the attached components. Oh and don't mention the blue heatsinks. They do look strange inside a black and golden schemed power supply, but as you can remember back at Computex the housing was still dark matte black with a red fan installed. It made sense at the time and Enermax unfortunately had already produced all of the heatsinks and were unable to change those when the new look was introduced. For component geeks, there is a Rubycon capacitor in the primary and a lot of Nippon Chemi-Con caps in the secondary. The solid-state caps are made in Taiwan, though.

The overall quality is as we would expect from Enermax, but they still managed to top former achievements. As they previously worked with PCBs made of synthetic resin bonded paper (FR-2), things always looked a little shabby inside. With the new multi-layer PCB it all looks much cleaner and adds a huge percentage of quality to the units.

The Fan


Since Enermax bought its own fan company a while ago they started producing a wide range of funky fans. Together with their twister bearing they have come up with some pretty good fans lately and are in fact able to diversify the product ranges according to their actual needs. In the case of the Modu87+ and Pro87+ for example Enermax wanted a larger fan; 140mm is the largest possible in an ATX power supply today and it's already patented, so Enermax decided to make a 139mm fan themselves. Together with golden blades this fan looks truly amazing, and we are happy that there aren't any LEDs. The fan carries the model number EA142512W-OAB. Enermax also worked on the Hall-IC inside the fan and made it possible to run the fan at incredibly low RPMs, which we will see later.

Originally published at https://www.anandtech.com/show/2920 (Wayback Machine).