Archive 1997–2024

Biostar TPower i55 – Super Middle Weight Contender

Overclocking

The TPower i55 offers an excellent overclocking experience. Some additional BIOS tuning to improve memory performance would make this a great motherboard for most enthusiasts.

Core i5/750 8GB Results



Our maximum stable overclock on air-cooling with the Core i5/750 resulted in a 4.1GHz clock speed at a respectable 215MHz Bclk with a variety of 8GB DDR3-2000+ kits. The primary voltages settings were 1.3625V VCore, 1.35V VTT, 1.80V PLL, and 1.66V VDimm. We ran the board with Load Line Calibration enabled for stability due to the Dynamic VID setup on this board. This meant setting our voltage manually to 1.360V resulted in 1.368V readings under load and 1.088V at idle. We never encountered any problems with DVID, except for slightly lower benchmark scores as the system would generally take to ramp voltages before hitting maximum CPU core speeds.

We could run our memory at DDR3-2152 with 8GB loaded and the i5/750 on 1.66V VDimm. We scaled back to DDR3-1721 at C7 timings which offered the same performance, if not better, than DDR3-2152 C9.

Core i7/860 8GB Results



Our i7/860 fared better clocking wise than the i5/750, with a 20x215 setting for 4.3GHz. Memory was set at DDR3-2152 with 9-9-9-24 1T timings.

VTT is set to 1.38V, PLL at 1.80V, VDimm at 1.66V, and VCore at 1.425V with LLC enabled. Under load conditions VCore was +.005V with LLC enabled and -.02 with it disabled. At idle, VCore was 1.136V.



Thoughts

The overclocking results are very solid and certainly 4.1GHz~4.4GHz speeds are fast enough for most users. We initially thought the Dynamic VID setup would create problems with the board highly overclocked, but we never encountered any stability problems finding the voltage ramping to be unobtrusive and seamless to user experience.

Of note, we could not lock in the top turbo multiplier with our retail processors. Our i5-750 will operate at the 22x multiplier in manual mode on the Gigabyte and ASUS boards, but was limited to 21x on this board. That could be a problem for those looking to squeeze out that last few MHz, but for the majority of users it will not matter.

We have no concerns recommending the Biostar TPower i55 board for 24/7 overclocking use. When overclocked, the board is extremely stable and fast. As a side bonus, S3 resume worked properly with the Bclk settings at 215MHz.

Originally published at https://www.anandtech.com/show/2880 (Wayback Machine).