EVGA X58 Classified - Trophy Board
- Posted in
- Motherboards
Specifications and Features
| EVGA X58 Classified | |
| Market Segment | Enthusiast and Extreme Benchmarking |
| CPU Interface | LGA-1366 |
| CPU Support | LGA-1366 Nehalem i7 Series of Processors |
| Chipset | Intel X58 |
| BCLK Speeds | 133~500 MHz in 1MHz increments |
| DDR3 Memory Speed | 800, 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933 Frequency Ratios |
| Uncore Frequency | Full i7 Processor IMC multipliers supported, Options available as per CPU |
| PCIe Speeds | Auto, 100MHz - 140MHz in 1MHz increments |
| Core Voltage | Auto, 1.00V to 2.24V in 0.00625V increments |
| CPU Vdroop Compensation | Enabled, Disabled |
| CPU Clock Multiplier | Dependant on Processor, all available multipliers supported |
| DRAM Voltage DDR3 | Auto, 0.70V ~ 3.39V in 10mV increments, 1.50V standard |
| DRAM Timing Control | tCL, tRCD, tRP, tRAS, + 17 additional timings + Chipset Configuration |
| DRAM Command Rate | Auto, 1T, 2T |
| IOH Voltage | 1.10V - 1.875V in 25mV increments |
| ICH Voltage | Auto, 1.05V ~ 1.825V in 25mV increments |
| CPU VTT (Uncore) Voltage | Auto, 1.17V ~ 2.17V in 25mV increments |
| CPU PLL Voltage | Auto, 0.60V ~ 2.70V in 75mV increments, 1.80V Base |
| IOH PLL Vcore | Auto, 0.60V ~ 2.70V in 75mV increments, 1.80V Base |
| QPI PLL Vcore | Auto, 1.10V ~ 1.875V in 25mV increments, 1.10V Base |
| IOH/ICH Voltage | Auto, 1.50V ~ 2.275V in 25mV increments, 1.50V Base |
| NF200 Voltage | Auto, 0.70v~1.075V in 125mV increments, then 1.20V~2.70V in 25mV increments. 1.20V Base |
| Memory Slots | Six 240-pin DDR3 DIMM Slots Triple-Channel Configuration Regular Unbuffered DDR3 Memory to 12GB Total |
| Expansion Slots | 4 - PCIe 2.0 x16, Supports up to NVIDIA 3-way SLI Technology + PhysX 1 - PCIe (1.x) x1 1 - PCI Slot 2.2 |
| Onboard SATA/RAID | 6x SATA 3.0Gbps Ports - Intel ICH10R Hot Plug and NCQ Support, RAID 0, 1, 5 RAID 0+1 Support and Intel Matrix Technology Support |
| Onboard IDE and Additional SATA | 2xJMicron JMB363 PATA (up to 2 UDMA 133/100/66 devices) 1 External eSATA port + 3 Internal JMB363 SATA Ports |
| Onboard USB 2.0 and IEEE-1394 | 10 USB 2.0 Ports - (8) I/O Panel, (2) via headers 1x 1394a Ports - (1) I/O Panel, (1) via header |
| Onboard LAN w/Teaming | Dual Realtek RTL8111C PCIe Gigabit Ethernet Controllers |
| Onboard Audio | Realtek ALC 889 - 8 Channel HD audio codec |
| Power Connectors | ATX 24-pin, Dual 8-pin ATX 12V |
| I/O Panel | 1 x PS/2 Keyboard 1 x eSATA 1 x SPDIF - Coaxial Out, 1 x Toslink Optical Out 1 x IEEE 1394 2 x RJ45 6 x Audio Out 8 x USB 2.0/1.1 |
| Fan Headers | 1 CPU + 4 Additional Headers |
| Fan Control | Full Fan speed Control Via BIOS |
| BIOS Revisions Used | IX58S21R |
Overall layout is excellent with everything accessible enough even when the board is fully loaded. The ECP panel allows remote positioning of power, reset, hex code, and PCI-E disable jumpers as well as VCore boost options in 0.1V steps totaling a maximum 0.3V overvolt on-the-fly. There are only four fan headers available (three with fan control via the BIOS) on the board, but positioning of each one is reasonably good and allows access in all configurations.
Slot layout is a big feature of the X58 Classified board, allowing multiple GPU configurations and a discrete soundcard to be used in tandem. When loaded fully, the NF200 provides the following lane allocation to the PCI-E slots: with three of the x16 mechanical slots loaded the lane allocation is 16x-16x-16x; with all four x16 slots loaded, the allocation is 16x-16x-8x-8x.
Realtek's ALC 889 fills the role of onboard sound here - nothing special, but it does work reasonably well in Vista. Hardcore gamers tend to veer towards the Creative Labs range or vendors like ASUS and Auzentech for alternative solutions. That said, the ALC 889 is clear enough and offers decent detailed audio in games and music, but lacks the wide midrange and bass punch of a dedicated soundcard. It is also a little low in maximum signal gain but not too bad compared to other onboard solutions. Microphones needing higher levels of gain or lower impedance headphones will lack a bit of clarity and overall volume when driven by the onboard Realtek solution.
The lower power rails (such as PLL circuitry) are all supplied by linear regulators, which offer low noise and clean power into sensitive circuitry. This does result in a higher overall heat dump into the motherboard PCB, but such side effects are expected on a board that attempts to break down all potential barriers for achieving high processor clocks with subzero cooling. Included in the hardware bundle are SATA/IDE cables, USB/FireWire extension headers, the ECP panel, three different SLI bridges for multi-GPU setups, and SATA to Molex converter cables. Packaging is excellent and both of our boards arrived from overseas shipping locations without any component or motherboard damage.
EVGA's excellent E-LEET software is part of the Classified's repertoire. We think this software is the best OS tweaking utility currently available from a manufacturer. A simple and clean interface based upon the CPU-Z GUI allows software level control of voltages and bus speed manipulation with minimal system overhead. This means you will not be hindered in achieving maximum overclocks due to system loads imposed by unnecessary graphical fluff and light shows. All of our heavier overclocks were obtained using E-LEET, saving us a tremendous amount of time compared to the set and reboot process. Temperature monitoring is also offered, although it's curiously lacking a temperature report for the IOH, which given the need for active cooling would be an appreciated addition. If EVGA could devise a way to offer memory tweaking then E-LEET would be close to our personal favorite, abit's wonderful uGuru program. Of course, EVGA is still in business so we can let that slide for now.
Originally published at https://www.anandtech.com/show/2764 (Wayback Machine).




