Thermaltake TR2 QFan Series
- Posted in
- Cases/Cooling/PSUs
Temperatures, Fan Speed, and Acoustics

Both primary heatsinks hold stable at up to 40°C throughout testing, only surpassing that threshold when we overload the power supply. It's also nice to see that temperatures immediately decrease once the fan starts spinning faster. Of course we need to keep in mind that the heatsinks and fan don't need to deal with nearly as much heat, since these are only 300W to 450W PSUs. That's one of the benefits of using a smaller power supply.
We have previously commented that we didn't like the standard CWT heatsink design, with their "umbrella" fins blocking airflow and failing to dissipate heat as well as we would like. This time, due to less produced heat and a desire to cut costs, CWT used smaller heatsinks and the different temperature results are immediately visible. The only complaint we have is with the third heatsink; it should be larger, since even at room temperature it reaches up to 80°C.

The fan spins at a very tame 650RPM for the first couple loading stages. Once we reach 50% load, fan speed quickly begins to ramp up and is at 1500RPM with 80% load. The good news is that the heatsinks immediately get cooler, but the drawback is increased noise output. With a slightly better heatsink design and improved fan speed control, it should be possible to keep temperatures and noise levels down.

The acoustic noise develops fast with increasing fan speed. Going from 650RPM to 1500RPM brings a nice fat 10dB(A) increase in noise, which is not very good. The maximum noise output of 33dB(A) is unfortunately very loud. We strongly recommend that users interested in keeping noise levels down try to stay under 50% of the rated PSU output.
Originally published at https://www.anandtech.com/show/2670 (Wayback Machine).