Archive 1997–2024

Enermax Revolution 85+ High Efficiency PSU

Cables and Connectors


All of the cables are sleeved in Enermax's standard black mesh with golden threads. As mentioned on the previous page, the cable management works with different jacks on this PSU. The peripheral harnesses utilize a 5-pin port: one pin for 3.3V, 5V, and 12V with the last two for grounding. The connectors are keyed so that they can't be inserted backwards. The PEG connectors for graphics cards come from the 12-pin jacks. The six pins on the left each provide 12V; since each 12-pin connector supports two PEG connections, three 12V cables are routed to each PEG connector. The four PEG jacks and six jacks for peripherals should be more than enough for all but the most insane users.




As the graphic shows, the cables in this unit are not very long. 75cm is the longest distance between power supply and SATA or Molex connectors. This might be okay for many cases, but especially with cases where some hard drives are in the opposite corner from the PSU you will need cables longer than 75cm. The two long PEG connectors is a great idea since the user will be able to route these cables through the case. In addition, there are three more cable harnesses for graphics cards, each with two connectors (6/8-pin transformable). With eight PEG connectors plus features like the 12V rail design, this power supply is truly designed for maximum graphics setups.

The Fan


The fan is a double ball bearing model, frequently used by Enermax. The part number is RL4Z-B1352512LB-3M.

Originally published at https://www.anandtech.com/show/2662 (Wayback Machine).