Debunking Power Supply Myths
- Posted in
- Cases/Cooling/PSUs
Connectors and the 12V Rail Issue, Cont'd
As a second example, let's take our high-end system. This requires more power, making it a little more difficult to find an appropriate power supply -- especially if you want to run 3-way SLI. NVIDIA initially only certified 1200W power supplies for that sort of setup, but Corsair was eventually able to receive this certification for a 1000W unit. To run a 3-way SLI setup, we need at least six 6-pin PEG connectors, so let's start by looking at the number of connectors available on our high-end PSUs.
| PSU PEG Connectors | |||
| Manufacturer and Name | # of 6-pin PEG Connectors | # of 6/8-pin PEG Connectors | Total |
| Antec NeoPower Blue | 1 | 1 | 2 |
| Antec Signature | 2 | 2 | 4 |
| Silverstone Decathlon | 4 | 0 | 4 |
| Zalman ZM850HP | 2 | 2 | 4 |
| Enermax Pro82+ | 0 | 4 | 4 |
As you can see, none of the power supplies we listed are able to run more than two GPUs, since none of them have the available six PEG connectors. We still don't recommend 3-way SLI, has the advantages over two-way SLI are sketchy at best. Regular SLI also has the advantage of only requiring four 6-pin PEG connectors even for the highest-end GPUs. All of the listed power supplies can meet this requirement, except for the Antec NeoPower Blue.
For the second 12V rail issue, here's a look at the specific power requirements of our graphics card, the GeForce 8800 Ultra:
| GPU Power Requirements by Connector | |||||
| Vendor and Chip | Through 6-pin Jack |
Through PCI-E Slot |
Total Power | ||
| NVIDIA GeForce 8800 Ultra | 9.4A | 112.8W | 6.1A | 72.2W | 186W |
If you plan to run multiple cards, you can just multiply 186W by the number of cards in the system. We found during testing that the cards don't consume equal amounts of power. The first GPU always uses the same amount of power, whether in a single or SLI configuration. The second and third cards however require much less power, which also means that they are doing less work. In testing a variety of benchmarks and games, we saw that the second and third graphics cards only use 40% to 50% of the power of a single GPU.
One thing is obvious when looking at the power consumption of the single GeForce 8800 Ultra: the maximum power draw is only 15.5A, which you can get from a single 12V rail. Most higher-end power supplies have multiple 12V rails, which should make distributing power to your GPUs even easier. As long as the 24-pin ATX connector and the different 6-pin PEG connectors run on different 12V rails, none of the rails should end up with an excessive load. That takes care of the 300W power requirements mentioned by GPU vendors.
If you take the high-end system (with an optional third graphics card), you are looking at one of the most demanding systems available. Of course, you could always overclock the processor and graphics cards, which might increase power requirements by another 30%, but we'll leave that topic for another day. We were able to run this test system with a normal 850W power supply, and even with a reasonable load the PSU fan didn't make that much noise. Most of the high-end PSUs we've chosen for this article could also run a triple-SLI setup, provided they have sufficient connectors.
At the beginning of the year, we requested a special AnandTech Edition of PC Power & Cooling's Turbo Cool 860W power supply with six PEG connectors, specifically for running a triple-SLI setup. We have been using the power supply since then with three GeForce 8800 Ultra cards, an Intel Core 2 Extreme QX6850 CPU, and 12 Western Digital hard drives without any problems. Clearly, quality of construction and number of connectors are far more important than a silly wattage rating.
Originally published at https://www.anandtech.com/show/2624/debunking-power-supply-myths (Wayback Machine).