Debunking Power Supply Myths
- Posted in
- Cases/Cooling/PSUs
Final Thoughts
Building a system these days feels a lot more complex than it was a few years ago. There are many more components in the market, with new ones announced every week, and there's also a lot of overlap. It's nice that some manufacturers are now including advice on power requirements on their products, but that doesn't mean you should take this information at face value. A processor vendor might list a TDP of 150W, but that doesn't necessarily mean that particular processor will actually use 150W. It is more of a rough indication, but at least it's better than nothing.
We have tested processors from AMD and Intel and we have to conclude that the Intel parts are usually far below the listed TDP, where is the AMD parts are sometimes higher. The same applies to graphics cards, but in this case we have a huge difference between the various loading mechanisms. For example, we couldn't reach maximum load on an 8800 Ultra using any current DirectX 10 game, but the Fur benchmark was able to do so. To achieve a similar load, you need to balance frame rates, anti-aliasing, anisotropic filtering, and resolution. High frame rates without AA/AF typically don't put as much of a load on the GPU(s), and likewise high AA/AF settings with low frame rates usually result in lower power consumption. In testing, it seems like maintaining 80 to 100 FPS while increasing AA/AF levels resulted in worst-case power consumption -- though obviously that can vary by application/game.
Something else you need to keep in mind when building a new system is your hard drive power requirements. Most power supplies provide information about their power consumption on the label, although they list current rather than wattage. The power requirements for a hard drive are quite low compared to processors and graphics cards, but remember that hard drives typically need three times as much power during startup as they use during normal use. This only occurs for a split second, so this spike is only visible using an oscilloscope. However, this can cause problems with certain power supplies in combination with larger disk arrays.
Hopefully this article has helped to shed some light on what factors need to be considered when choosing a power supply. Our tests have certainly showed that most components to use nearly as much power as you might think. Look at the tables we've listed on the first page, and then use that information to figure out what sort of power supply you actually need.
Our three sample systems show that few if any people actually need anything more than 850W power supply, especially if you can get an appropriate number of connectors. About the only reason you should consider anything more is if you want to keep your power supply at a lower load, since optimal efficiency and lower noise levels usually come at around half the rated output. Overclockers might also want a bit of extra headroom. Otherwise, there's really no need for a 1000W power supplies, and certainly not those with even higher ratings.
Our power supply reviews include efficiency and noise level charts at various wattage loads. Using these, you can easily compare your own system to see what sort of efficiency and noise you would get. You might be surprised to learn that your intended high-end setup really won't make much use of that spiffy new 1000W PSU; you might be greener than you think!
Originally published at https://www.anandtech.com/show/2624/debunking-power-supply-myths (Wayback Machine).