OCZ EliteXStream 800W and 1000W
- Posted in
- Cases/Cooling/PSUs
Efficiency

We will be bringing two graphics of efficiency from now on. The first shows the efficiency at the load percentages and the second shows the efficiency at the different wattage outputs. The second one gives users a better comparison to other power supplies. If you know the amount of power your system requires, you can look up that load in the table below and see what efficiency the power supplies will provide.


To our surprise, the efficiency is higher than expected. We have seen similar layouts already and the efficiency never exceeded 83% with 230VAC. The 800W EliteXStream reaches its peak efficiency of 86% at a 350W load, and the 1000W version brings it up to 87% at a load of 350-400W. Both are excellent results. Another interesting aspect of performance is that both power supplies provide good efficiency over an amazing range of power loads. In both cases, the efficiency at almost any load a user would apply (at least on a system that would warrant the use of an 800W or 1000W PSU) is more than 80%. It is strange to see that the efficiency is so much higher with 230VAC than lower input voltages; normally the difference is only around 1%.
Acoustics

The EliteXStream runs very quiet at normal room temperatures. The 1000W version is around 5dB(A) louder at higher loads, but at equivalent loads the two units have similar acoustic readings. Only loads of 600W and more begin to cause noticeable noise; before that point, most users will not hear the power supply when it's in a case.
PFC

PFC readings are very good. With lower input voltages, loads from 20% up achieve more than .99 correction. 230VAC also shows good results, even though it's lower than the other two input voltages.
Originally published at https://www.anandtech.com/show/2497 (Wayback Machine).