Archive 1997–2024

OCZ EliteXStream 800W and 1000W

DC Output Stability and Quality

As always, the stability of the rails is fine up to a certain load. At loads above 80%, the lines drop quite a bit, but they remain in spec. Heat does not seem to be a problem on this power supply, as the rails are similar even at higher temperatures. We have combined the DC output of both power supplies into each one graph to keep the overview. The distribution of both power supplies has been quite similar.








The different rails start above ideal and end below ideal, so the percentage of load regulation seems to be quite high. The 12V rail looks the best, showing a 3% drop. This is an average result among the PSUs we've tested, but we have predominantly looked at quality units so even "average" is good.


Current Limits




The current limiter on both power supplies is the same for the 5V and 3.3V rails. However, the 12V rails also show quite similar limits to our surprise. The 800W EliteXStream can pull a little more than 1000W from its 12V rail alone while the 1000W version can draw almost 1200W from this single rail. All rails combined is a different story however, since the maximum output is around 100W over each PSU's rated output.

Originally published at https://www.anandtech.com/show/2497 (Wayback Machine).