OCZ EliteXStream 800W and 1000W
- Posted in
- Cases/Cooling/PSUs
Internals

Opening this unit reveals a layout similar to what we've seen before. The power supply is actually made by Impervio, a fairly new company but one who has delivered good designs so far. Looking at the shot above shows one of the cleanest topologies we've seen, which makes it pretty easy for the novice to see the different parts of a power supply. The top area holds the input filtering stage; beside in the right third of the PCB we find the primary stage with main caps and IC. In the middle are the transformers and the left third houses the secondary stage. The coolers are a very light design, which allows air to come through and cool parts underneath them.

The printing on the PCB shows that it can work with 800W, 900W, or 1000W. It's good that OCZ didn't bother with a 900W version; that would have been pretty much useless since we already question the existence of the 1000W version.

The above mentioned filtering stage looks really impressive in this unit. The EMI filtering, X-caps, and coils line up nicely on the upper side of the PCB. On the right side below the heatsink, we find the rectifier bridge and Y-caps.



The primary stage houses three main capacitors made by Hitachi. They are each rated at 330µF and 420V, which is a good choice. We already saw this configuration in Silverstone power supplies, and the result was impressive.
Originally published at https://www.anandtech.com/show/2497 (Wayback Machine).