Archive 1997–2024

The Gigabyte GA-X48T-DQ6 - Redefining the High End?

Test Setup

Gigabyte GA-X48T- DQ6
Standard/Overclocking/Benchmark Testbed
Processor Intel Core 2 Quad Extreme QX6800
   (Quad-core 2.93GHz 1066FSB 2x4MB Shared Cache)
Intel Core 2 Quad Extreme QX9650
   (Quad-core 3GHz 1333FSB 2x6MB Shared Cache)
CPU Voltage 1.200V ~ 1.450V
Cooling Water cooling: Swiftech Apogee GTX
PA120.3 Rad
3 X Laing DDC Ultra Petra Top pumps in series
3x Panaflo 120mm Fans 7-10V
Power Supply OCZ 1000W
Memory OCZ DDR3 PC3-14400 (DDR-1800) Platinum Edition
2x1GB XP, 4x1GB Vista 64-bit
Memory Settings 5-5-5-12 1N (266 and 333FSB)
6-6-6-18 1N (400 FSB)
8-8-8-20 1N (450FSB)
Video Cards MSI 8800 Ultra
Video Drivers NVIDIA 169.09 (XP), 169.25 (Vista 64)
Hard Drive Western Digital 7200RPM 250GB SATA 3/Gbps 16MB Buffer
Optical Drives Plextor PX-B900A, Toshiba SD-H802A
Case Lian Li -75
BIOS F3D
Operating System Windows XP 32-bit SP2
.

We decided to use our base QX6800 CPU with our standard tests run on the 9x multiplier to simulate the attractively priced Q6600 CPU and to compare against some of our previous benchmarking results. The QX9650 was used to cross-compare performance at relevant overclocks using our compact benchmark test suite. In this section of testing, we aim to remain within realistic cooling capacity temperatures and current CPU stepping capabilities. This better shows an overall picture of motherboard performance potential using widely available parts.

With such a vast array of overclocking BIOS functions at our disposal, we decided to stick with a single operating system environment for the overclocking tests. We selected Microsoft Windows XP SP2 due to its maturity, taking away some of the time burden looking for possible software level conflicts that may exist on a newer OS (though we ventured to run a compact Vista test suite for the non-overclocking benchmarks). The Vista tests were all run at board defaults, using an FSB multiplier combination of 9x333 and 4GB of memory with both processors.

We ran 1280x1024 resolution game benchmark tests in order to cross-compare CPU MHz related gains in our board specific tests. We utilize new drive images on each board in order to minimize any potential driver conflicts. Our 3DMark results utilize the standard benchmark resolution for each program. We run each benchmark five times, throw out the two low and high scores, and report the remaining score to reflect a repeatable average.

Since the Gigabyte GA-X48T-DQ6 is for the overclocker and gamer as opposed to typical internet browsing activities, we decided to take a different look at this board and focus on overclocking for this particular article. Please note the memory timings used at various overclocks are in the above table.

Originally published at https://www.anandtech.com/show/2410 (Wayback Machine).