ASUS Maximus Extreme - the Extreme Benchmarker's Choice?
- Posted in
- Motherboards
XP - Everest Cache and Memory Bandwidth
![]() |
![]() |
![]() |
![]() |
In the top 2 screenshots we ran 2GB of DDR3 memory at DDR2 timings just to get an idea how memory speed scaling effects synthetic latency and bandwidth figures. Obviously, nobody will purchase DDR3 modules and run them at DDR2 speeds, but we do so here just to provide a comparison. Our screenshots show that DDR3 does not really begin to attain latency figures under 50ns until speeds of ~1600Mhz and a Cas latency of 6 are applied. The X38 chipset seems to provide best latency and memory bandwdith figures with a Performance Level (tRD) of 6 or 7. In turn, using a tRD of 6 or 7 limits us of memory speeds between 1600-1800Mhz. The best performance actually comes in around DDR1800 with Cas 7-7-7 timings with a tRD of 7 at 1N command rate. There is more than a monetary premium to pay on this kind of performance though - higher voltages to both the Northbridge and memory. If building a PC for long term use, then DDR31600 at 400FSB should be attainable with low voltages to all key areas of the board, ensuring lower chances of hardware failure.
Originally published at https://www.anandtech.com/show/2394 (Wayback Machine).



