400-450W PSU Roundup
- Posted in
- Cases/Cooling/PSUs
Thermaltake DC Outputs
The output stability is good, as we have seen from most CWT models these days. The 3.3V and 5V rails start at the upper end of the specified range and almost drop out at maximum loads (a 6-7% drop overall), but almost falling out of spec is not the same as actually dropping out. The 12V rails show good stability and stay within 3% of the ideal value.
Efficiency
Efficiency once again registers over 85%, but this is only with a higher 230VAC input voltage. With 120VAC efficiency is mostly above 80%, but the results with 90VAC show a rapid falloff from 80% load and above.
Ripple & Noise Results
| Thermaltake Purepower RX 450W | |||||
| PSU Load | 3.3V | 5V | 12V1 | 12V2 | Wattage All Rails |
| 10% | 1.54A | 1.43A | 1.22A | 1.40A | 45W |
| 20% | 3.07A | 2.87A | 2.45A | 2.80A | 90W |
| 50% | 7.68A | 7.17A | 6.12A | 6.99A | 225W |
| 80% | 12.28A | 11.47A | 9.79A | 11.18A | 356W |
| 100% | 15.36A | 14.33A | 12.23A | 13.98A | 442W |
| 110% | 16.89A | 15.76A | 13.46A | 15.38A | 484W |




The output stability is good, as we have seen from most CWT models these days. The 3.3V and 5V rails start at the upper end of the specified range and almost drop out at maximum loads (a 6-7% drop overall), but almost falling out of spec is not the same as actually dropping out. The 12V rails show good stability and stay within 3% of the ideal value.
Efficiency

Efficiency once again registers over 85%, but this is only with a higher 230VAC input voltage. With 120VAC efficiency is mostly above 80%, but the results with 90VAC show a rapid falloff from 80% load and above.
Ripple & Noise Results






Originally published at https://www.anandtech.com/show/2371 (Wayback Machine).