Ultra High-End PSU Roundup
- Posted in
- Cases/Cooling/PSUs
Tagan ITZ 1300W Loads
DC Outputs



From the DC results we can see already that this unit is actually much better performing than any previous version. As we have six 12V rails there is quite some load to put on this power supply. On all graphs we can see the same results as shortly before the lower end of the 5% edge the power supply tries hard (and barely manages) to stay within specs. All rails are operating close to the limits but remain inside the recommended output limit.
Ripple & Noise Results






The Tagan ITZ power supply has more than just four 12V rails but to keep an acceptable overview we decited here as well to just show four of them in each graphic. Tagan has indeed problems with keeping the specs since we measured up to 130mV at the 12V1 rail. The 3.3 and 5V rail went also out of specification with higher loads of more than 1000 watts.
| Tagan ITZ 1300W Load Values | |||||||||
| PSU Load | 3.3V | 5V | 12V1 | 12V2 | 12V3 | 12V4 | 12V5 | 12V6 | Wattage All Rails |
| 10% | 1.87A | 2.16A | 1.53A | 1.53A | 1.53A | 1.53A | 1.53A | 1.53A | 131W |
| 20% | 3.74A | 4.31A | 3.06A | 3.06A | 3.06A | 3.06A | 3.06A | 3.06A | 261W |
| 50% | 9.34A | 10.78A | 7.64A | 7.64A | 7.64A | 7.64A | 7.64A | 7.64A | 646W |
| 80% | 14.95A | 17.25A | 12.23A | 12.23A | 12.23A | 12.23A | 12.23A | 12.23A | 1023W |
| 100% | 18.69A | 21.56A | 15.29A | 15.29A | 15.29A | 15.29A | 15.29A | 15.29A | 1274W |
| 110% | 20.56A | 23.72A | 16.81A | 16.81A | 16.81A | 16.81A | 16.81A | 16.81A | 1393W |
DC Outputs



From the DC results we can see already that this unit is actually much better performing than any previous version. As we have six 12V rails there is quite some load to put on this power supply. On all graphs we can see the same results as shortly before the lower end of the 5% edge the power supply tries hard (and barely manages) to stay within specs. All rails are operating close to the limits but remain inside the recommended output limit.
Ripple & Noise Results






The Tagan ITZ power supply has more than just four 12V rails but to keep an acceptable overview we decited here as well to just show four of them in each graphic. Tagan has indeed problems with keeping the specs since we measured up to 130mV at the 12V1 rail. The 3.3 and 5V rail went also out of specification with higher loads of more than 1000 watts.
Originally published at https://www.anandtech.com/show/2357 (Wayback Machine).