Archive 1997–2024

Ultra High-End PSU Roundup

CM 1250W Loads

Cooler Master Real Power PRO 1250W Load Values
PSU Load 3.3V 5V 12V1 12V2 12V3 12V4 12V5 12V6 Wattage
All Rails
10% 2.68 2.68 1.16 1.16 1.62 1.62 1.62 1.16 127W
20% 5.36 5.36 2.32 2.32 3.24 3.24 3.24 2.32 252W
50% 13.4 13.4 5.79 5.79 8.11 8.11 8.11 5.79 621W
80% 21.44 21.44 9.27 9.27 12.97 12.97 12.97 9.27 979W
100% 26.8 26.8 11.58 11.58 16.22 16.22 16.22 11.58 1210W
110% 29.48 29.48 12.74 12.74 17.84 17.84 17.84 12.74 1322W

DC Outputs




The two lower voltage rails perform okay, but at higher loads we came to the lower edge of the specified 5% deviance and even below with around 1000W of load. The 12V rail held stable in the range of 3% under the ideal amount of 12.00V. Since we show all six rails in only one graph it has a wide range of different distribution. While having the lower voltage rails drop out of spec is something of a problem, it's actually not as bad as some might think. Most of the load will be placed on the 12V rails, and as difficult as it will be to configure a system that can make use of 1250W of power, it is even more unlikely that most systems will come anywhere near requiring 100W on the 3.3V rail or 150W on the 5V rail - not to mention the 5Vsb rail. Still, it would be best to have all rails stay within spec.

Ripple & Noise Results







The Cooler Master power supply has more than just four 12V rails but to keep an acceptable overview we decited to just show four of them in each graphic.

Originally published at https://www.anandtech.com/show/2357 (Wayback Machine).