Archive 1997–2024

Gigabyte GA-X38-DQ6: An early look at X38

Memory Testing

Click to enlarge

The Sandra unbuffered scores on the Gigabyte board are around 4% better at stock speeds and 7% better in our overclocked scenario. In our SuperPI 1.5 benchmark that relies on low latencies for improved scores, we see where this advantage is apparent. We consider these results to be excellent as the X38 chipset, BIOS, and board are engineering samples and we fully expect to see further improvements in the retail boards.

Q6600 9x266 Memory Tests

Click to enlarge

Click to enlarge

We were able to set our timings to 4-4-4-12 at DDR2-1066 by increasing the memory voltage to 2.250V on the Gigabyte board and 2.275V on the abit board. In this particular test, our two boards are basically equal with write, latency, and copy tests favoring the X38 and read throughput going to the P35.

Q6600 9x400 Memory Tests

Click to enlarge

Click to enlarge

Like our stock scores, the two boards are basically equal with write, latency, and copy tests favoring the X38 and read throughput going to the P35. We set our memory timings to 5-5-5-18, bumped the memory voltages up to 2.275V and 2.350V, and equalized the memory sub-timings where applicable.

Originally published at https://www.anandtech.com/show/2314 (Wayback Machine).