The Enermax Liberty - Getting long in the tooth, but still worth a look
- Posted in
- Cases/Cooling/PSUs
Inside - Primary Side


Looking down on the PCB there is nothing really special about it since it's a pretty typical design. Enermax placed the transient filter stage at the side of the PCB located next to the exiting air. Most of the filtering is done on a separate PCB with capacitors and coils. Two black and white colored cables pass the electricity through a fuse to the primary side.


Even though things may look a little disorganized, the components are doing their job. The rectifier bridge has its own little metal cooler since it will produce heat. It sits directly between the two big coils, making slight contact with the one on the right. On the left side we can find the PFC IC which as usual is on a separate PCB. We found a chip on this PCB manufactured by Texas Instruments called UCC3817AN, which combines PFC and PWM control into one chip. The PWM control stabilizes the DC outputs that are then passed to the components later. Combining these two chips is pretty typical for modern power supplies; if they're not combined the chip for the PWM control is usually located on the secondary side and will then have the protection functions for the rails integrated instead.


Looking down on the PCB there is nothing really special about it since it's a pretty typical design. Enermax placed the transient filter stage at the side of the PCB located next to the exiting air. Most of the filtering is done on a separate PCB with capacitors and coils. Two black and white colored cables pass the electricity through a fuse to the primary side.


Even though things may look a little disorganized, the components are doing their job. The rectifier bridge has its own little metal cooler since it will produce heat. It sits directly between the two big coils, making slight contact with the one on the right. On the left side we can find the PFC IC which as usual is on a separate PCB. We found a chip on this PCB manufactured by Texas Instruments called UCC3817AN, which combines PFC and PWM control into one chip. The PWM control stabilizes the DC outputs that are then passed to the components later. Combining these two chips is pretty typical for modern power supplies; if they're not combined the chip for the PWM control is usually located on the secondary side and will then have the protection functions for the rails integrated instead.
Originally published at https://www.anandtech.com/show/2289 (Wayback Machine).