Archive 1997–2024

The Single 12V Rail SilverStone Olympia OP650

115VAC 12V Rail Tests

The 12v rails all performed very well during the test and none ran out of spec. We tested the power supply with the little OCP knob off as we mentioned before (the default configuration). That means that we should have been working with only one 12v rail. As we connected the cables to our machines we discovered that there are in fact four 12v rails at all times. It doesn't matter if you switch this knob off or on, the result will be the same. This could have just switched off OCP on each rail, meaning that they would be separated in some other way. The rails are separated to supply the following:
  • 12V1 is supplying the Motherboard (yellow/blue cable)
  • 12V2 is connected to the 4pin connector for the CPU (yellow/black cable)
  • 12V3 is supplying the second 4pin connector which results in the 8pin connector (yellow cable)
  • 12V4 is responsible for all the rest including the PCI-Express cards and components (yellow/green cable)










Originally published at https://www.anandtech.com/show/2275 (Wayback Machine).