Archive 1997–2024

Noctua NH-U12F: Quiet Air Cooling from Austria

Installation

The installation instructions for the Noctua are so good they should be a model for other cooler manufactures. Details and photographs are in the included manual and they are also available at the Noctua website. You first decide the mount kit you will use and then consider how you want the cooler to be oriented on the motherboard.


Noctua clearly spells out that the motherboard needs to be removed from the case to mount the cooler. For socket 775 the adapter mount can be attached with the mount holes in either direction.


You can use whichever configuration fits your board the best, since Noctua includes two sets of universal mount clips that allow any of the installations to be turned 90 degrees if necessary.


Universal mounting clips, which work with all mount adapters, are then screwed to the heatsink base. Shown are the standard universal mounts, but also included are optional horseshoe or u-shaped mounts, which install on the heatpipe sides and allow the Noctua cooler to be "turned" 90 degrees for mounting.


Self-adhesive elastomeric anti-vibration strips are then attached to the fan side mount(s) as shown.


For most configurations it is much easier to mount the heatsink to the motherboard before installing the fan(s). With the standard universal clips the fan covers the screw used for mounting. With the "horseshoe" shape mounts the supplied screwdriver fits the round holes near the end of the long direction of the heatsink. This allows mounting the cooler even though the heatsink covers the mounting screws.

All of this does not mean the mounting of the Noctua is any easier than some other heatsinks. Manipulating and aligning the under-the-board brace and the aboveboard washers/clips/screws is frankly a pain. The good news is that the only thing you need to install at that step are the small clips - not the huge heatsink. However, the clear instructions make a difficult task more bearable and there's a little less urge to throw things out the window.

While the Noctua NH-U12F is undeniably heavy and large, the back brace and very secure feel of the finished installation does inspire confidence that the cooler is not going to fall off the motherboard. However, as with any large and heavy cooler, you probably should avoid moving the mounted cooler around a great deal, as it could stress the board. None of the large heatpipe towers are really designed for a LAN party computer that is frequently transported.

UPDATE: Noctua has provided the following information on transporting the NH-U12F: "The mounting system of the NH-U12F was designed with LAN gamers in mind and we encourage users not to take the cooler off during transport. With many thousands of coolers sold, we haven't had one single problem from transporting a system with the Noctua cooler."

Originally published at https://www.anandtech.com/show/2219 (Wayback Machine).