Hitachi Deskstar 7K1000 in RAID 0: Is Two Terabytes really better than One?
- Posted in
- Storage
Final Thoughts
If it is not obvious by now, RAID 0 will provide outstanding results in synthetic benchmarks but really does nothing in actual applications. We should probably clarify that statement in detail. Utilizing the best performing drives in RAID 0 is the setup to have if you are looking to publish top benchmark scores with results in PCMark05 improving by 25% as an example. That same setup will provide you with at best minimal performance improvements in most applications, or sometimes no difference at all.
Our only meaningful application performance improvement with RAID 0 came in the Nero Recode tests where the improved write performance reduced our encoding process by about 5%. What will that 5% cost you? In this case, $399 for the second 7K1000, a halving of the mean time between failure rates on each drive, a data backup nightmare, and increases in noise, thermals, and power consumption. RAID 0 sounds impressive in a system configuration and provides a performance placebo effect when viewing synthetic benchmarks. However, RAID 0 is just not worth the trouble or cost for the average desktop user or gamer, especially with the software RAID capabilities included on most motherboards. We will delve into the RAID world with additional tests and hardware combinations in the coming weeks but for now we again recommend that most desktop users should just stay away from it.
Now that we have answered what happens if two of these impressive drives are operated in RAID 0, we can get back to our conclusions about the performance of this drive. Our experiences over the past few weeks with the Hitachi Deskstar 7K1000 have been terrific. The overall performance of this drive is excellent and close enough to the WD1500ADFD Raptor drive that we consider it a worthy adversary in most situations. The Raptors are still the drives to own for most benchmarking purposes or those simply wanting the best overall performance in a SATA drive regardless of price or capacity, but the reduced capacity and higher noise levels are certainly a drawback.
We consider the Hitachi Deskstar 7K1000 the best 7200rpm drive we have tested to date. This is quite the accomplishment considering this is Hitachi's first 3.5" form factor drive that utilizes perpendicular recording technology. We found the write performance and sustained transfer rates to be excellent and class leading in several of our test results. The drive also offers a very balanced blend of performance across a wide variety of business and home applications. The 7K1000 even has the best overall thermal and acoustic characteristics of the high performance 7200rpm drives in our tests. For these reasons, we award the Hitachi Deskstar 7K1000 our Gold Editors' Choice award and highly recommend the purchase of this drive if you are currently looking for a high-capacity drive with performance to match.
The Deskstar 7K1000 is not without faults as we stated in our first article. We did find in our Nero Recode tests and to some degree in our Winstone tests that the drive does not perform as expected in handling large block sizes of data in sequential order. Conversely, the Achilles heel of the Seagate 750GB drive was its inability to handle large files in non-sequential order. Hitachi has overcome this for this most part with a large 32MB cache and from all apparent indications firmware that is tuned with operational balance in mind or even favoring non-sequential read/writes. This is a luxury it can afford due to its cache size and areal density advantages over the other drives in our test group.
Hitachi's implementation of their Automatic Acoustic Management technology on the 7K1000 does not hinder performance in a noticeable manner and offers a significant advantage for those needing a spacious drive in a quiet system. While our original acoustic testing shows the drive to be very quiet, it is not totally silent. However, based on conversations with Hitachi we fully expect the CinemaStar version of this drive (designed for DVR operations) to improve upon the Deskstar results. As stated in both articles, we believe leaving AAM and NCQ turned on provides the best user experience with this drive. While there may be a very slight performance advantage in certain benchmarks with AAM off, we feel like the benefit of having a quiet 1TB drive in our system is well worth the price of losing a few benchmark points.
If it is not obvious by now, RAID 0 will provide outstanding results in synthetic benchmarks but really does nothing in actual applications. We should probably clarify that statement in detail. Utilizing the best performing drives in RAID 0 is the setup to have if you are looking to publish top benchmark scores with results in PCMark05 improving by 25% as an example. That same setup will provide you with at best minimal performance improvements in most applications, or sometimes no difference at all.
Our only meaningful application performance improvement with RAID 0 came in the Nero Recode tests where the improved write performance reduced our encoding process by about 5%. What will that 5% cost you? In this case, $399 for the second 7K1000, a halving of the mean time between failure rates on each drive, a data backup nightmare, and increases in noise, thermals, and power consumption. RAID 0 sounds impressive in a system configuration and provides a performance placebo effect when viewing synthetic benchmarks. However, RAID 0 is just not worth the trouble or cost for the average desktop user or gamer, especially with the software RAID capabilities included on most motherboards. We will delve into the RAID world with additional tests and hardware combinations in the coming weeks but for now we again recommend that most desktop users should just stay away from it.
Now that we have answered what happens if two of these impressive drives are operated in RAID 0, we can get back to our conclusions about the performance of this drive. Our experiences over the past few weeks with the Hitachi Deskstar 7K1000 have been terrific. The overall performance of this drive is excellent and close enough to the WD1500ADFD Raptor drive that we consider it a worthy adversary in most situations. The Raptors are still the drives to own for most benchmarking purposes or those simply wanting the best overall performance in a SATA drive regardless of price or capacity, but the reduced capacity and higher noise levels are certainly a drawback.
![]() |
The Deskstar 7K1000 is not without faults as we stated in our first article. We did find in our Nero Recode tests and to some degree in our Winstone tests that the drive does not perform as expected in handling large block sizes of data in sequential order. Conversely, the Achilles heel of the Seagate 750GB drive was its inability to handle large files in non-sequential order. Hitachi has overcome this for this most part with a large 32MB cache and from all apparent indications firmware that is tuned with operational balance in mind or even favoring non-sequential read/writes. This is a luxury it can afford due to its cache size and areal density advantages over the other drives in our test group.
Hitachi's implementation of their Automatic Acoustic Management technology on the 7K1000 does not hinder performance in a noticeable manner and offers a significant advantage for those needing a spacious drive in a quiet system. While our original acoustic testing shows the drive to be very quiet, it is not totally silent. However, based on conversations with Hitachi we fully expect the CinemaStar version of this drive (designed for DVR operations) to improve upon the Deskstar results. As stated in both articles, we believe leaving AAM and NCQ turned on provides the best user experience with this drive. While there may be a very slight performance advantage in certain benchmarks with AAM off, we feel like the benefit of having a quiet 1TB drive in our system is well worth the price of losing a few benchmark points.
Originally published at https://www.anandtech.com/show/2212 (Wayback Machine).
