Dell 2707WFP: Looking for the Middle Ground of Large LCDs
- Posted in
- Displays
Features - OSD
The on-screen display is nearly identical to that found on the 2407WFP. A few of the option names have been changed slightly, and the "Image Modes" menu is no longer present. A contrast control has also been added, but those are about the only significant differences. Here's a quick rundown of the various OSD options.
Most of the features we like to see in an OSD are available, but as usual if you use a digital connection some of these options are disabled. Screen scaling defaults to fill/stretch when using a DVI connection, and you need to use your graphics card drivers to change the scaling options. That's unfortunate, as not all drivers/devices have the ability to control scaling over a DVI connection.
The addition of a contrast control is definitely an improvement over the 2407WFP, as it gives users one more way to tweak the display's output. By default, contrast and brightness are set to 50%, although during calibration we found that decreasing the color settings slightly and increasing the contrast and brightness provided a slightly better result.
Somewhat odd is the fact that the sharpness function is enabled even with a digital connection, and you can actually get a fuzzy appearance to your display should you so desire. Perhaps this can function as a cheap way of getting pseudo-antialiasing if you lack the necessary graphics hardware (or in cases where a game/application can't support AA). We found that anything above the default 60% setting didn't seem to affect the clarity when using a digital connection, although there was perhaps a slight difference when using analog connections.
The scaling function does work properly when using any of the analog connections, so you can disable scaling altogether, or you can use the 1:1 scaling so that something like a 720p HDTV signal will still show up in the proper 16:9 aspect ratio while filling the majority of your display. That should generally work well for console systems, although using a PS3 with a DVI connection would likely result in the entire display always been filled. (Since we don't have a PS3, we were unable to verify this.)
The on-screen display is nearly identical to that found on the 2407WFP. A few of the option names have been changed slightly, and the "Image Modes" menu is no longer present. A contrast control has also been added, but those are about the only significant differences. Here's a quick rundown of the various OSD options.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| Click to enlarge |
Most of the features we like to see in an OSD are available, but as usual if you use a digital connection some of these options are disabled. Screen scaling defaults to fill/stretch when using a DVI connection, and you need to use your graphics card drivers to change the scaling options. That's unfortunate, as not all drivers/devices have the ability to control scaling over a DVI connection.
The addition of a contrast control is definitely an improvement over the 2407WFP, as it gives users one more way to tweak the display's output. By default, contrast and brightness are set to 50%, although during calibration we found that decreasing the color settings slightly and increasing the contrast and brightness provided a slightly better result.
Somewhat odd is the fact that the sharpness function is enabled even with a digital connection, and you can actually get a fuzzy appearance to your display should you so desire. Perhaps this can function as a cheap way of getting pseudo-antialiasing if you lack the necessary graphics hardware (or in cases where a game/application can't support AA). We found that anything above the default 60% setting didn't seem to affect the clarity when using a digital connection, although there was perhaps a slight difference when using analog connections.
The scaling function does work properly when using any of the analog connections, so you can disable scaling altogether, or you can use the 1:1 scaling so that something like a 720p HDTV signal will still show up in the proper 16:9 aspect ratio while filling the majority of your display. That should generally work well for console systems, although using a PS3 with a DVI connection would likely result in the entire display always been filled. (Since we don't have a PS3, we were unable to verify this.)
Originally published at https://www.anandtech.com/show/2204 (Wayback Machine).






