Archive 1997–2024

Micro-ATX Cases - Shoebox Showdown

Ultra MicroFly - Interior

The biggest difference between the MicroFly and the X-QPack is that the three side panels are separate rather than one large piece. This makes opening up the MicroFly a little easier, but makes the end result feel just a tad less sturdy. Additionally, the case is about an inch deeper than the X-QPack and the original Chenming, making the overall working conditions inside more spacious.

Click to enlarge

The same horizontal cylindrical brace holds the front strongly to the back of the MicroFly's left side, and the case suffers from the same slightly unsupported PSU mount. Notice that it does contain an extra 80mm fan for intake in the front.

Click to enlarge

Only the top panel is secured with the single rear screw (which should have been replaced by a thumbscrew in our opinion, though end-users can do that on their own); once the top is removed both side panels lift up and out. When totally opened up, it's easy to see the removable motherboard tray.

Click to enlarge

The dedicated hard drive cage holds two drives, but a third and even fourth could be put in the external bays if desired. The hard drive cage can be totally taken out too, just like the motherboard tray. We did have a little difficulty with the mobo tray's sliding - it was kind of stiff and the easily bent thin aluminum tracks didn't help, but it worked well enough.

Click to enlarge

Originally published at https://www.anandtech.com/show/2147 (Wayback Machine).