Archive 1997–2024

SMB NAS Roundup

Hammer Z-Box

The Hammer is a unique option in this space and is vastly different than the other devices in this article. The Hammer is essentially an entry level IP SAN, where a device driver on the client writes to the disk using block-level I/O instead of file-level I/O. One of the main differences between the Hammer and a traditional IP SAN is that the Hammer uses its own proprietary software driver vs. the iSCSI specification. We at many points in the article pondered whether this device fits in, and determined that it does due to its price point and the fact that it is still marketed as a NAS competitor.

How it works

The Hammer uses a software based initiator which handles all the I/O communication with the device and transmits it over UDP. As we alluded to above, the I/O commands are not simple file level requests; they are actually block-level. Some caveats to this approach are that it requires a fair amount of processing power on the client, and each client will require the software driver.

The Z-Box supports four types of RAID: 0, 1, 0+1, and 10. One item to note is that while the chosen RAID configuration is stored on the box, the client software handles the actual data "RAIDing", not the device itself. Unlike most NAS devices, the Z-Box is expandable. Each disk in the array gets an IP address, and you can daisy chain multiple devices together and create stripes and mirrors across any group of disks you like. For the average home user, this technology is not very useful. But, to a small or medium business looking for relatively cheap IP based storage this is an attractive option.

The Hammer comes with a single gigabit Ethernet port on the rear of the device and four hot-swap SATA drive bays The file system is either Z-FS (Zetera File System) or NTFS, so in case you haven't noticed this device is windows only. Z-FS is a custom file system that supports multi-user access and is licensed from DataPlow.

The chassis itself is quite small and has a rugged industrial look to it. Dimensions for the unit are 162mm (W) x 190mm (H) x 325mm (D), and it weighs in at 9Kg. The front panel consists of a few LEDs: one for each disk and one power. The rear of the unit houses one gigabit network port and the power supply.


Rear

Front
Click to enlarge

Admin Interface

The management interface for the Hammer is client-side, since the device is just a target housing disks. We were somewhat unimpressed by the client-side administration of the device. Using the management software was somewhat cumbersome, especially creating volumes. When creating a volume the end user has to calculate how large the volume should be and how much space from each disk to use, which is far from intuitive.

Pros
  • Very fast
  • Small footprint
  • Very quiet
Cons
  • High CPU usage on the client
  • Supposed to compete with a NAS, but lacks a lot of functionality found in the various NAS products like media streaming.
Retail (ZipZoomFly.com): $1100

Originally published at https://www.anandtech.com/show/2127 (Wayback Machine).