EPoX EP-5P945 PRO: Budget 945P Performance
- Posted in
- Motherboards
FSB Overclocking Results
This board is a decent overclocker for the price and we were pleasantly surprised considering the previous limits we have seen on other boards with the 945P chipset. At these settings the system was able to complete our expanded benchmark test suite three consecutive times along with Dual Prime95 and Dual SuperPI 32M without issue.
In order for our board to operate properly at 319FSB we had to set the memory to a 1:1 ratio and were able to even post at 323FSB but the system was not stable. When we changed our memory to the 4:5 ratio (DDR2-667) our FSB capability dropped to 307FSB and we had to change our memory timings to 4-4-4-12 for stability. We tried different memory modules from our value memory roundup with the same results so it appears there is a limitation with the chipset or BIOS.
Memory Stress Testing
Memory Tests
Our memory stress test looks at the ability of the EPoX EP-5P945 PRO to operate at the officially supported memory frequencies of DDR2-533 at the best memory timings we can achieve. Our DDR2 memory is from Transcend and was utilized in some extensive HTPC testing for our upcoming Intel DHCAT article. The memory features average 5-5-5-12 latencies at DDR2-667 but was able to perform at much lower latencies in our testing with increased voltages at DDR2-533 and DDR2-667, and it only costs around $70 for a 1GB kit.
The EPoX board was perfectly stable with 2 DDR2 modules in Dual-Channel at the settings of 3-3-3-9 at 1.9V. We were able to hold 3-4-3-10 at 2.07V at DDR2-667 but could not overclock the board at this memory speed without increasing to 4-4-3-12 timings. We will now install all four available memory slots that result in more strenuous requirements on the memory subsystem than testing 2 DDR2 modules on a motherboard.
The EPoX board was completely stable with four DDR2 modules in Dual-Channel operation at the settings of 3-4-3-10 at 2.02V. We tried several combinations of memory settings and memory modules at lower timings but the board was not stable enough to complete our test suite. Overall, our recommendation would be to utilize DDR2-533 memory that offers low latency memory timings at reduced voltages on this board.
| EPoX EP-5P945 PRO Overclocking Testbed |
|
| Processor: | Intel Core 2 Duo E6300 Dual Core, 1.86GHz, 2MB Unified Cache 1066FSB, 7x Multiplier |
| CPU Voltage: | 1.3125V (default 1.3V) |
| Cooling: | Cooler Master X-Dream P775 |
| Power Supply: | OCZ GameXStream 700W |
| Memory: | 2 x 512mb Transcend JetRam DDR2-533 Tested at 3-4-3-9 1.95V, 1:1 Ratio |
| Video Cards: | 1 x EVGA 7600GS |
| Hard Drive: | Seagate 320GB 7200RPM SATA2 16MB Buffer |
| Maximum OC: (Standard Ratio) |
319x7 (3-4-3-9, 1:1), CPU 1.3125V, MCH - 1.60V 2233MHz (+20%) |
| . | |
This board is a decent overclocker for the price and we were pleasantly surprised considering the previous limits we have seen on other boards with the 945P chipset. At these settings the system was able to complete our expanded benchmark test suite three consecutive times along with Dual Prime95 and Dual SuperPI 32M without issue.
In order for our board to operate properly at 319FSB we had to set the memory to a 1:1 ratio and were able to even post at 323FSB but the system was not stable. When we changed our memory to the 4:5 ratio (DDR2-667) our FSB capability dropped to 307FSB and we had to change our memory timings to 4-4-4-12 for stability. We tried different memory modules from our value memory roundup with the same results so it appears there is a limitation with the chipset or BIOS.
Memory Stress Testing
Memory Tests
Our memory stress test looks at the ability of the EPoX EP-5P945 PRO to operate at the officially supported memory frequencies of DDR2-533 at the best memory timings we can achieve. Our DDR2 memory is from Transcend and was utilized in some extensive HTPC testing for our upcoming Intel DHCAT article. The memory features average 5-5-5-12 latencies at DDR2-667 but was able to perform at much lower latencies in our testing with increased voltages at DDR2-533 and DDR2-667, and it only costs around $70 for a 1GB kit.
| EPoX EP-5P945 PRO Stable DDR2-533 Timings - 2 DIMMs (2/4 slots populated - 1 Dual-Channel Bank) |
|
| Clock Speed: | 266MHz (1066FSB) |
| Timing Mode: | 533MHz - Default |
| CAS Latency: | 3 |
| RAS to CAS Delay: | 3 |
| RAS Precharge: | 3 |
| RAS Cycle Time: | 9 |
| Voltage: | 1.90V |
The EPoX board was perfectly stable with 2 DDR2 modules in Dual-Channel at the settings of 3-3-3-9 at 1.9V. We were able to hold 3-4-3-10 at 2.07V at DDR2-667 but could not overclock the board at this memory speed without increasing to 4-4-3-12 timings. We will now install all four available memory slots that result in more strenuous requirements on the memory subsystem than testing 2 DDR2 modules on a motherboard.
| EPoX EP-5P945 PRO Stable DDR2-533 Timings - 2 DIMMs (4/4 slots populated - 2 Dual-Channel Bank) |
|
| Clock Speed: | 266MHz (1066FSB) |
| Timing Mode: | 533MHz - Default |
| CAS Latency: | 3 |
| RAS to CAS Delay: | 4 |
| RAS Precharge: | 3 |
| RAS Cycle Time: | 10 |
| Voltage: | 2.02V |
The EPoX board was completely stable with four DDR2 modules in Dual-Channel operation at the settings of 3-4-3-10 at 2.02V. We tried several combinations of memory settings and memory modules at lower timings but the board was not stable enough to complete our test suite. Overall, our recommendation would be to utilize DDR2-533 memory that offers low latency memory timings at reduced voltages on this board.
Originally published at https://www.anandtech.com/show/2078 (Wayback Machine).