DFI CFX3200-DR: ATI RD580 Tweak Attack
- Posted in
- Motherboards
Optimum tRAS
In past reviews, memory bandwidth tests established that a tRAS setting of 11 or 12 was generally best for nForce2, a tRAS of 10 was optimal for the nForce3 chipset, a tRAS of 7 was optimal for the nForce4/ATI RD480/ULi M1697 chipsets, and a tRAS of 10 produced the best bandwidth on the ULi 1695. The ASUS A8R32-MVP review established that a tRAS setting of 8 produced the highest bandwidth on the RD580 chipset. That review describes the test procedure and the shows the results that show 8 to be the best tRAS setting. We used the tRAS 8 setting for all benchmarking.Memory Stress Testing
The DFI CFX3200-DR easily handles 2-2-2-8-1T timings at stock speed. The default setting for Command Rate is 1T, but it is a little more difficult to determine how to force 1T for higher overclocks. The setting to control Command Rate is under "Genie BIOS Setting", "DRAM Configuration", "Command per Clock (CPC)". Instead of simple Auto, 1T, 2T settings, the options are Auto, Enable, Disable. After a bit of testing we figured out that ENABLE is 1T and DISABLE is 2T. Auto normally returns 1T, but you can force 1T with the ENABLE setting if you wish.Running four double-sided 512MB or 1GB DIMMs is much more demanding than running two DS DIMMs, and like almost every board we have tested the Command Rate needed to drop to 2T with 4 DS DIMMs. This really should not be a surprise since the DIMM timing is primarily a function of the memory controller on the AMD processor. With 4 DIMMs the DFI CFX3200-DR remained stable with the same aggressive 2-2-2-8 timings that worked best for two DS DIMMs.
| Stable DDR400 Timings - 4 DIMMs (4/4 DIMMs populated) |
|
| Clock Speed: | 200MHz |
| CAS Latency: | 2 |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 8T* |
| Precharge Delay: | 2T |
| Command Rate: | 2T |
*8T was determined by MemTest86 benchmarks to deliver the widest bandwidth with the ATI RD580 chipset. While the board would operate at tRAS of 5T or lower all benchmarks were run at 8T. |
Originally published at https://www.anandtech.com/show/2002 (Wayback Machine).