HTPC 4-Way Roundup
- Posted in
- Cases/Cooling/PSUs
Antec Overture II (cont’d)
Taking a couple screws off the back of the top cover is all one needs to do to free the steel lid of the Overture II. Sliding it backwards and opening up the case reveals a more compartmentalized design than the Mstation, with much more capacity for additional drives.
With the three removable drive cages taken out, the interior layout of the Overture II can be seen. The power supply is in pretty much the same place as it was in the HT-1100 case, but instead of extra space on the left for a specialized cooling duct, the Overture puts the extra space to use allowing for two additional hard drives and two exhaust blower fans - one of which remains hidden under the hard drive supports.
Here, we see the 5¼“ drive cage with our SATA DVD combo drive installed. The cage is well made, with strong, tool-less latches on the top and bottom, but doesn’t allow for any adjustments in terms of drive positioning.
The internal 3½” drive cage features rubber grommets for silent drive operation and is held in place by rails on the bottom and two case screws on top.
Taking a couple screws off the back of the top cover is all one needs to do to free the steel lid of the Overture II. Sliding it backwards and opening up the case reveals a more compartmentalized design than the Mstation, with much more capacity for additional drives.
With the three removable drive cages taken out, the interior layout of the Overture II can be seen. The power supply is in pretty much the same place as it was in the HT-1100 case, but instead of extra space on the left for a specialized cooling duct, the Overture puts the extra space to use allowing for two additional hard drives and two exhaust blower fans - one of which remains hidden under the hard drive supports.
Here, we see the 5¼“ drive cage with our SATA DVD combo drive installed. The cage is well made, with strong, tool-less latches on the top and bottom, but doesn’t allow for any adjustments in terms of drive positioning.
The internal 3½” drive cage features rubber grommets for silent drive operation and is held in place by rails on the bottom and two case screws on top.



Originally published at https://www.anandtech.com/show/1868 (Wayback Machine).



