ATI’s Crossfire: Best Overclocker on the Market?
- Posted in
- CPUs
Overclocking: ATI Crossfire AMD Reference Board
We have rarely tested a board with such incredible stability in overclocking. It was not always easy to reach our desired overclock with all of the options available in BIOS, but once we reached the overclock, it was exceptionally stable. We did notice that the ATI responds best to gradual increases in overclocking - it does not like, for example, to be set to 245 clock frequency. It will reach higher overclocks if the Clock frequency is increased gradually instead of one fell swoop. ATI has even added a "Gradual OC option" in BIOS to accommodate that reality.
The ATI Crossfire AMD reached a new record with our standard 4000+ Clawhammer. The highest previous overclock at stock multiplier was 240, but the ATI chipset went on to a stable 245. This would be quite an accomplishment for any board, but it is remarkable for a Reference board. The 315 Maximum bus frequency is also a great performance, second only to the DFI nForce4, which reached 318. We suspect that more time and tweaking may even have allowed us to break this record.
ATI clearly set out to build an enthusiast board that manufacturers could copy down to the smallest detail. Our advice to most manufacturers would be to copy the Reference Design. Unless you are certain that you can extract even more performance from this chipset, it is best to copy this top-performing Reference board.
At settings of 2T, we could reach even higher to a frequency of 325. There is a lot of discussion on the web these days claiming that you can minimize the impact of the 2T setting with certain options on Revision E AMD processors. We did not verify this claim in our tests, but we can tell you that all the talked-about options for 2T performance modes are in the memory timings section. It is little touches like these that tell us that enthusiasts in ATI or outside the company have had a big hand in the design of the Crossfire AMD.
| Front Side Bus Overclocking Testbed | |
| Default Voltage | |
| Processor: | Athlon 64 4000+ (2.4GHz, 1MB Cache) |
| CPU Voltage: | 1.525V (default 1.50V) |
| Cooling: | Thermaltake Silent Boost K8 Heatsink/Fan |
| Power Supply: | OCZ Power Stream 520W |
| Memory: | OCZ PC3200 EL Platinum Rev. 2 (Samsung TCCD Memory Chips) |
| Hard Drive: | Seagate 120GB 7200RPM SATA 8MB Cache |
| Maximum OC: (Standard Ratio) |
245x12 (4x HT, 2.5-3-3-10) 2940MHz (+22.5%) |
| Maximum FSB: (Lower Ratio) |
315 x 9 (3x HT, 1T) (2835MHz, 2 DIMMs in DC mode) (+57.5% Bus Overclock) |
We have rarely tested a board with such incredible stability in overclocking. It was not always easy to reach our desired overclock with all of the options available in BIOS, but once we reached the overclock, it was exceptionally stable. We did notice that the ATI responds best to gradual increases in overclocking - it does not like, for example, to be set to 245 clock frequency. It will reach higher overclocks if the Clock frequency is increased gradually instead of one fell swoop. ATI has even added a "Gradual OC option" in BIOS to accommodate that reality.
The ATI Crossfire AMD reached a new record with our standard 4000+ Clawhammer. The highest previous overclock at stock multiplier was 240, but the ATI chipset went on to a stable 245. This would be quite an accomplishment for any board, but it is remarkable for a Reference board. The 315 Maximum bus frequency is also a great performance, second only to the DFI nForce4, which reached 318. We suspect that more time and tweaking may even have allowed us to break this record.
ATI clearly set out to build an enthusiast board that manufacturers could copy down to the smallest detail. Our advice to most manufacturers would be to copy the Reference Design. Unless you are certain that you can extract even more performance from this chipset, it is best to copy this top-performing Reference board.
At settings of 2T, we could reach even higher to a frequency of 325. There is a lot of discussion on the web these days claiming that you can minimize the impact of the 2T setting with certain options on Revision E AMD processors. We did not verify this claim in our tests, but we can tell you that all the talked-about options for 2T performance modes are in the memory timings section. It is little touches like these that tell us that enthusiasts in ATI or outside the company have had a big hand in the design of the Crossfire AMD.
Originally published at https://www.anandtech.com/show/1800 (Wayback Machine).