Archive 1997–2024

AcomData E5 320GB External Desktop Storage: Slap on another

HDTach 3

We have added a new tool to our arsenal - HDTach v3. HDTach is a simple, yet effective tool for measuring the sequential read and burst speed of a drive. Take a look at our results.


Click to enlarge.

The graph HDTach is very similar to the one produced by WinBench 99’s Transfer Rate test. We expected to see a lower read speed with a USB connected drive, but what made us question USB connectivity were the brief rises of speed at the beginning of the read and between the 40-62GB mark. The burst speed actually reflects these rises, which HDTach reports to be 37.6MB/sec as the ceiling and an average read speed of 34.2MB/sec.


Click to enlarge.

The FireWire 400 measurement showed a bit more consistency and slightly higher read speeds, since FireWire is not tied to the CPU as is the USB interface. The burst speed here is 40.2MB/sec with an average read speed of 37.5MB/sec.

As an example of what the read graph of a normal SATA hard drive would look like, we have provided the following screen shot.


Click to enlarge.

Since the Seagate drive is directly connected to the system bus by way of the SATA interface, there are no restrictions on the read speeds except for the drives’ own mechanics and physic.

Originally published at https://www.anandtech.com/show/1774 (Wayback Machine).