Intel NUC13 Extreme Raptor Canyon Review: Sizzling SFF Performance Powerhouse
Power Consumption and Thermal Characteristics
The power consumption at the wall was measured with a 4K display being driven through the HDMI port of the system. In the graph below, we compare the idle and load power of the Intel NUC13RNGi9 (Raptor Canyon) with other systems evaluated before. For load power consumption, we ran the AIDA64 System Stability Test with various stress components, as well as our custom stress test with Prime95 / Furmark, and noted the peak as well as idling power consumption at the wall.

The numbers are consistent with the TDP and suggested PL1 / PL2 values for the processors in the systems, and do not come as any surprise. For the Raptor Canyon NUC, the 150W PL1 of the Core i9-13900K and the 375W TDP of the RTX 3080 Ti should result in steady state maximum power consumption of 500+ W. Given the PL2 of 250W and power consumption of miscellaneous components, a peak number close to 700W is only to be expected.
Stress Testing
Our thermal stress routine is a combination of Prime95, Furmark, and Finalwire's AIDA64 System Stability Test. The following 9-step sequence is followed, starting with the system at idle:
- Start with the Prime95 stress test configured for maximum power consumption
- After 30 minutes, add Furmark GPU stress workload
- After 30 minutes, terminate the Prime95 workload
- After 30 minutes, terminate the Furmark workload and let the system idle
- After 30 minutes of idling, start the AIDA64 System Stress Test (SST) with CPU, caches, and RAM activated
- After 30 minutes, terminate the previous AIDA64 SST and start a new one with the GPU, CPU, caches, and RAM activated
- After 30 minutes, terminate the previous AIDA64 SST and start a new one with only the GPU activated
- After 30 minutes, terminate the previous AIDA64 SST and start a new one with the CPU, GPU, caches, RAM, and SSD activated
- After 30 minutes, terminate the AIDA64 SST and let the system idle for 30 minutes
Traditionally, this test used to record the clock frequencies - however, with the increasing number of cores in modern processors and fine-grained clock control, frequency information makes the graphs cluttered and doesn't contribute much to understanding the thermal performance of the system. The focus is now on the power consumption and temperature profiles to determine if throttling is in play.
The thermal solution is top-notch - the CPU can sustain 150W without any problems and the GPU can sustain 375W also. None of the components go above 85C. The fans have adaptive speeds and the system is reasonably quiet unless heavily stressed, as shown in the above fan speed graph.
Originally published at https://www.anandtech.com/show/17647/intel-nuc13-extreme-raptor-canyon-review-sizzling-sff-performance-powerhouse (Wayback Machine).


