Archive 1997–2024

Plextor PX-740A

The Test

Our benchmarks include a few tests to show the performance of each of our test drives. We first use Nero CD-DVD Speed to create a data disc, which tests the write capabilities/performance of the drive. We then run a transfer rate test to benchmark the read capabilities as well as verify the data on the disc.

Finally, we use our Plextor PX-712A drive to read the media for PI/PO errors. According to the ECMA standard...
A row of an ECC Block that has at least 1 byte in error constitutes a PI error. In any 8 consecutive ECC Blocks the total number of PI errors before correction shall not exceed 280.

A row is 182 bytes long where the last 10 bytes contain PI (Parity Inner) information. An ECC block is 208 rows long where the last 16 rows contain the PO (Parity Outer) information. This gives us a maximum possible PI error amount of 208 errors per block and for 8 blocks after each other this sum is of course 8 times higher giving a maximum possible amount of 1664 PI errors.

If a row of an ECC Block contains more than 5 erroneous bytes, the row is said to be “PI-uncorrectable” or PIF (Parity Inner Failures).

In any ECC Block the number of PI-uncorrectable rows should not exceed 4.
Now, some writers may create discs with more than 208 PI errors and they are not necessarily unreadable, but they are not the best quality discs around.

Our test bed:
AMD Athlon 64 3500+ (2.2Ghz)
Giga-byte GA-K8NXP-SLI
NVIDIA 6600GT SLI Edition (single 128MB card)
1GB (512MBx2) Corsair XMS4400
Plextor PX-712A, Firmware v1.07

Microsoft Windows XP SP2
Nero CD-DVD Speed 4.00
PlexTools Professional XL 3.03

Again, we have taken all of your feedback into consideration and have decided to go back to focusing more on the write quality of each media instead of just the write speeds. Our results are displayed on the following pages. The screenshots are again available in a ZIP files corresponding to the type of media.

Originally published at https://www.anandtech.com/show/1744 (Wayback Machine).