The Quest for More Processing Power, Part Three: "Multi core of Intel and AMD compared"
- Posted in
- CPUs
SMT Dead?
Simultaneous Multi Threading has been receiving quite a bit of criticism over the past months. Rumours about the demise of Hyper Threading were started, and Fred Weber of AMD even called it "a misuse of resources".The reason why SMT was no longer considered "cool" was because of the very mediocre performance increase that the Pentium 4 gained from Hyper Threading. In fact, we are still encountering applications where Hyperthreading decreases performance.
Anand reported in his "AMD's Athlon 64 X2 4800+ & 4200+ Dual Core Performance Preview":
"The other thing we continue to see is that dual core with Hyper Threading in these multitasking environments is very much the double-edged sword. There are some situations where having both Hyper Threading and dual core gives Intel a huge performance boost, but there are others where the exact opposite is true. As it currently stands, we're not sure how much of a future Hyper Threading will have in future Intel architectures - but it's definitely not a sure win."One of the upcoming AnandTech projects, a Database server comparison on SUSE Linux 9 SP1 (Kernel 2.6.x), is showing similar results - Hyper Threading decreases database read performance by 1% to 6% in many cases.
Why Hyperthreading fails to impress...
The current form of SMT [1] in the Pentium 4 is quite mediocre, but SMT is not going to disappear. The Netburst architecture is simply not well suited for SMT, and Intel implemented Hyper Threading with the goal of minimizing the die area cost. Only a few small structures were replicated - the die area cost was less than 5% of the total die area of the Pentium 4 (Northwood).The whole idea behind SMT is to execute two (or more) threads at the same time, on the same processor. Normally, a CPU will execute one thread, switch context (save the contents of the registers and CPU state in the cache), and then load the registers for another thread and execute it. The main objective is that a second thread would use the execution units that one thread cannot use at the moment, and vice versa. This implies a wide issue superscalar CPU; in other words, a CPU that is capable of executing many instructions in parallel.
And the Pentium 4 is hardly a wide issue superscalar CPU. It has only 4 execution ports: one Load, one store and two for executing either FP or integer instructions. In the best case, you are using the double-pumped ALU attached to these two ports, and you can achieve a burst of 6 instructions in one clock cycle: 4 additions on the 2 double-pumped ALUs, a load and a store. But the chances that you find 4 independent additions are relatively small.
The trace cache is only capable of delivering 6 micro-ops every two cycles. Those 6 micro-ops are on average about 4 x86 instructions. So, in reality, the Pentium 4 will rarely be able to sustain more than 2 x86 instructions per clock cycle. That is fine for a single threaded CPU. We measured with Intel's Vtune that, for example, an FP intensive program such as Povray is running at an IPC of 0.8-0.9, while Database applications (integer intensive) runs at IPC ranging from 0.3 to 0.5. So, an IPC of 2 is more than enough...for a single threaded CPU, that is!
While Intel's engineers designed the Hyper Threading on the Pentium 4, they made sure that one stalled logical processor would not make the other logical processor stop too. Cache misses and handling branch mispredictions might cause the first logical CPU to fill up buffering queues so that the second logical CPU has no room to run.
Therefore, some buffers and queues are effectively cut in half when you run two threads. Below, you can see how some buffers are shared dynamically between two threads and some are simply cut in two.

Originally published at https://www.anandtech.com/show/1685 (Wayback Machine).