Archive 1997–2024

Value Case Roundup: A Look at the Affordable


Foxconn CasEdge TK-09 (cont'd)

So far, we have seen four cases with only a few slightly varying features, but a great deal of difference in construction and cooling. Let's see how the TK-09 compares to the first 3 cases.


Construction

Like the 3131G, the TK-09 is made of the cheaper, thinner steel that can be easily bent out of shape. The panels are especially prone to bending if they are not taken care of. Though this is something to look out for, we did not run into any problems with the TK-09.

We did, however, cut ourselves when feeling around the TK-09. There are a horde of sharp edges that need attention and users should be very careful when handling hardware inside this case.


Cooling

Foxconn's TK-09 comes with a single 80mm fan mounted at the back of the case. We haven't seen a case thus far that comes with more than two fans installed, but the options are there nonetheless.

  

The TK-09 has room for two more 80mm fans in front of the drive bays. They can be mounted side by side, like those in the 8654BL, as intakes. Again, we thought mounting them vertically would be better for airflow around all of the hard drive bays.

The TK-09 also includes a Max Power 300W power supply, which increases the value of this package.


Installation

The only issue that we ran into during installation was with the sharp edges in the case. It is during this phase of our testing where we encountered most of the dangerous edges.

Besides that, all of our components installed without a hitch. Installation of the drives proved to be much easier and less time consuming due to the single-sided mounting design and we completed the system within 10 minutes.


Originally published at https://www.anandtech.com/show/1604 (Wayback Machine).