Archive 1997–2024

Photosmart M307: HP's Newest is Put to the Test


Noise

The noise test consists of pictures of our studio shot taken at increasing ISO levels to show the effect on the image. The pictures were taken after resetting the camera to its factory default settings. The camera was then set to record with the highest quality option with Tungsten WB. Click on a 100% crop below to view the full-size image. All images are sRGB color space.

 ISO 100  
Click to enlarge.
 ISO 200  
Click to enlarge.
 ISO 400  
Click to enlarge.

As these crops demonstrate, there isn't really a dramatic difference in the increase of noise from ISO 100 to 200. Even at ISO 100, there is a considerable amount of noise visible. As the ISO setting is raised, notice that some color information gets lost in the noise. Also, the ISO 200 image is a bit underexposed compared to ISO 100. Other than that, the addition of noise isn't too bad. From ISO 200 to 400, however, there is a significant loss of detail. At ISO 400, the image would probably still be considered usable, though it is quite fuzzy in appearance.

Originally published at https://www.anandtech.com/show/1554 (Wayback Machine).