Archive 1997–2024

Logisys CS888UV: Glowing Acrylic!


Benchmarking - Thermal

When benchmarking the CS888UV, we test the temperatures of key components including the actual CPU temperature, the actual temperature inside the heatsink, the temperatures of the DDR, Northbridge, Southbridge, HDD, PSU, and the ambient temperature inside the case, all during normal operation. During our testing, the PSU and CPU heatsink fans remain on to measure temperatures during normal system operations

Chaintech VNF3-250
AMD Athlon64 3200+
OCZ PC3200 DDR x 2
Zalman CNPS7000 Copper
Seagate Barracuda 120GB SATA
ATI 9800XT AGP8x
OCZ 520W PowerStream

Click to enlarge.

The thermal readings for the key components and points on the motherboard during operation were as follows:

Thermal Benchmarks - CPU

Thermal Benchmarks - Heat sink

Thermal Benchmarks - HDD

Thermal Benchmarks - DDR

Thermal Benchmarks - Northbridge

Thermal Benchmarks - Power Supply

Thermal Benchmarks - System Ambient

Since we changed our test bed motherboard since our roundup in July, we could not effectively compare our results to the 4 cases that we reviewed at that time. Instead, we have begun with a clean slate as (we did with our metal cases) in order to improve our comparison of results of acrylic cases that we will look at in the future.

From the graphs, it is obvious that the cooling system of the CS888UV is performing well, keeping temperatures low for all components. At 46.2 degrees, our Athlon 64 3200 CPU is performing at its peak after 30 minutes of running time. Our OCZ DDR is also keeping cool at 32.3 degrees around the same time. Most noticeably, our result for the ambient temperature of the air inside the CS888UV is comparable to some of our best performing metal cases at 26.4 degrees. This further proves that the four 80mm fans are doing an excellent job at circulating air through the case.

Originally published at https://www.anandtech.com/show/1534 (Wayback Machine).