Logisys CS888UV: Glowing Acrylic!
- Posted in
- Cases/Cooling/PSUs
Installation
Like any other case without tool-less features, the installation of each component using screws took about 15 minutes total.As we mentioned in the Motherboard Tray section, the motherboard sits directly on the right side panel. And since the drive bays use screws to secure each drive, we had to hold off on installing the motherboard until after we had installed our drives, using screws on both sides of the bays. We had to remove the right side panel to insert the screws on that side of the bays.
If Logisys had put in an extra panel for the motherboard to sit in, it would have been much easier to install all of the components in any order.
We also noticed that the heads of the supplied screws were not large enough given the size of the holes of the case. To clarify, when installing the power supply or drive bays, the screws' heads would dig into the acrylic, leaving an indentation into the soft material, causing damage to the case. Logisys does provide red washers but how much of an improvement does that really provide, and who really wants to use washers with every screw?
Originally published at https://www.anandtech.com/show/1534 (Wayback Machine).

