Archive 1997–2024

Konica Minolta DiMAGE Z2 & Z3: What is the difference in performance?

 

Battery Performance

Our general method for battery testing is to reset the camera to its default settings and change the recording mode to the highest quality option. Then, we take 5 pictures without the flash and 2 pictures with the flash until the battery is dead. For more information on our battery test, please refer to our Testing Procedures page. For this test, we used 4-AA NiMH Power2000 2500mAh batteries charged overnight in a Power2000 wall charger. The batteries were fully drained before charging for the test.

 

 

 

 Number of shots taken in one battery charge
Z2 3,643
Z3 2,295


Both the Z2 and Z3 performed extraordinarily in our battery test. The lower number of the Z3 can almost certainly be attributed to the Anti-shake system. Although the Z3 shot over 1,000 less images, we were still blown away by both of these cameras. We should note that this number will certainly go down a bit if the cameras are used more casually. Our results come from continuous shooting from a stationary position. Using the camera over an extended period of time, frequent use of the zoom, and reviewing images are a few factors that would decrease battery life. However, we believe that even with heavy use of either camera, battery life will still be impressive.

 

 

 

 

Originally published at https://www.anandtech.com/show/1462 (Wayback Machine).