Archive 1997–2024

Gigabyte 802.11g VPN Wireless Router


Network Performance

The BR404W is one of the many new wireless routers that offer "turbo" modes of 802.11g. Looking at the documentation carefully reveals that the much touted 89.5 Mbps throughput is only at WAN-LAN connections. For our wireless connections benchmarking, we used SiSoftware's SANDRA.

The two test machines used are configured as follows:

Test Configuration
OS: Windows XP SP1 and all patches applied
RAM: 512 MB
Motherboard: Intel D865GLC
Wireless NIC: Linksys WMP54G with Broadcom BCM94306 chipset machine 1 NetGear WG311 with Atheros AR5212 chipset on machine 2
NIC: Onboard Intel 10/1000*
*Latest drivers were used for all networking devices located from the manufacturers' website.

Five performance tests were conducted on the BR404W. The first test was an open WIFI system connecting to a wired LAN client. The second test was a WIFI client configured with 64 bit WEP enabled and a wired LAN client. The third test was a WIFI client configured for WPA Pre-shared key and a wired LAN client. The fourth test was between two WIFI clients, both with 64 bit WEP enabled. Lastly, two wired LAN clients were tested. All tests were conducted with the wireless clients within six feet of the AP router. The wired clients were connected with 25 CAT5 Ethernet cable on an Allied Telesyn 10/100 switch.

The results are as follows:

Network Bandwidth
Test 1 (Open WIFI to wired LAN client) 2524 KB/s
Test 2 (WIFI w/64 bit WEP to wired LAN client) 2162 KB/s
Test 3 (WIFI w/WPA to wired LAN client) 1658 KB/s
Test 4 (WIF to WIFI client w/64 bit WEP) 1194 KB/s
Test 5 (wired to wired LAN client) 9216 KB/s

Screenshots of the tests can be found here:




Click to enlarge.




Click to enlarge.




Click to enlarge.




Click to enlarge.




Click to enlarge.


The results that we received in our testing were typical with other 802.11g implementations. With each additional security feature, such as WEP and then WPA, performance took a noticeable hit. The same can be said for the number of wireless clients connecting to the AP. The amount of bandwidth available will depend on the security option chosen, such as WPA, divided by the number of clients.

Originally published at https://www.anandtech.com/show/1440 (Wayback Machine).