Enermax Sea Hawk
- Posted in
- Cases/Cooling/PSUs
External Design
The Sea Hawk has a sleek look given by its brushed metal side and top panels and its acrylic covered front bezel. The top half is occupied by four 5-1/2" drive bays, each with a case matching cover to continue the theme. The covers can be easily removed by pushing them out from the inside.Directly below the 5-1/4" drive bays are the 3-1/2" floppy bays. The top bay comes with a floppy drive bezel to keep the look consistent. The second bay uses a cover like the ones used for the larger drive bays.
The bottom section of the case is occupied by the power button above it all. There is also a blue temperature LCD display, the reset button directly beneath that, and finally, the fan speed control for up to 4 case fans directly below that. At the height of the fan speed control knob are the power and HDD LEDs on either side. The Sea Hawk comes with a 2-pin to 3-pin converter wire for the power LED to adapt to those boards.
At the bottom of the front of the case is a fold-down panel that hides the USB, audio, and Firewire ports. The internal connections for these ports are not the single plug type, but are divided by individual wires making it slightly tedious to connect.
Moving to the side panels, the left panel is always the standard windowed panel, since all of the components face towards that side. The Sea Hawk's left side panel has a simple rectangular window, which extends about 2/3 of the way up the panel and is wide enough to display the entire contents of the case.
Both panels can be removed easily by pulling back on the hooks that are mounted to them. We found this to be much more convenient than the indentations in panels that many other manufacturers have. The panels did stick a bit when we tried to pull them off, so the hooks helped us better there. The side panels are also secured to the case by thumbscrews, making them easier to work with.
Originally published at https://www.anandtech.com/show/1427 (Wayback Machine).





