Archive 1997–2024

Shuttle SK83G: VIA's Shot at SFF


Shuttle SK83G: Overclocking and Memory Testing


Overclocking Testbed
Processor: Athlon 64 3200+
2.0GHz
CPU Voltage: 1.50V (default)
Cooling: AMD stock Athlon 64 Heatsink/Fan
Power Supply: Shuttle 240W SilentX
Maximum OC:
(Default Ratio)
222FSB x 10
2222MHz (+11.1%)
Maximum "FSB" (HT):
(Lower Ratio)
232FSB @ 8X multiplier

During our routine overclocking testing, we were able to reach a core clock speed of 2.22GHz on our 3200+'s default 10X multiplier. Compared to Athlon XP and Pentium 4 processors, this overclock isn't anything to get excited about. However, as you may or may not be aware, Athlon 64 overclockability differs from processor to processor. Just look at AnandTech's very own nForce3 250Gb overclocking results from last month's Socket 754 roundup. As you can clearly see from that article, one of our other editors just happened to get an Athlon 64 processor (of the same 3200+ speed grade) that could overclock regularly to between 2442MHz and 2480MHz on stock cooling, default voltage, and default multiplier. I just happened to get an Athlon 64 3200+ that tops out around 2200MHz, give or take a few MHz.

Anyway, after seeing how low our Athlon 64's core clock speed ceiling was on default multiplier, we decided to see how well the Shuttle SK83G could handle a high FSB at an artificially low multiplier (8X in this case). The SK83G was able to reach only 232MHz FSB, which unfortunately, is the highest available FSB option in the BIOS. We aren't exactly sure if we'd get past 232MHz FSB if we were given room to operate above 232MHz in the BIOS, due to the mystery surrounding the AGP/PCI lock. That being said, we had to lower our HT setting from 4X (800MB/s) to 3X (600MB/s) to reach 232MHz. Certain nForce3 desktop motherboards reached as high as 266MHz FSB with 4X HT enabled. We understand, however, that these SFFs are running significantly less powerful PSUs than the ones that normal desktop enthusiasts use, so you can see why we aren't being too harsh here. That being said, the SK83G is simply not an overclocker's SFF, and there's no two ways about it at the moment.

Memory Stress Test Results:

This memory stress test is very basic, as it simply tests the ability of the Shuttle SK83G to operate at its officially supported memory frequency (400MHz DDR), at the best performing memory timings that our OCZ PC3500 Platinum Ltd Modules will support. Memory stress testing was conducted by running RAM at 400MHz with 2 DIMM slots filled.

Stable DDR400 Timings - 2 DIMMs
(2/2 DIMMs populated)
Clock Speed: 200MHz
Timing Mode: N/A
CAS Latency: 2.0
Bank Interleave: N/A
RAS to CAS Delay: 3T
RAS Precharge: 6T
Precharge Delay: 2T
Command Rate: N/A

Pretty much the only reason why you wouldn't be impressed with these timings running at 400MHz DDR is simply due to the fact that these same modules have run at CAS 2-2-2-6 at DDR400 on countless other motherboards, including nForce3 250Gb motherboards. Generally, these are perfectly fine timings, even if they are commonplace nowadays, especially among single channel DDR motherboards.

Originally published at https://www.anandtech.com/show/1390 (Wayback Machine).